Inspection instruments for metal can making, brewery and beverage industries
You Need, We Can!
Product portfolio search
Detection object:
Test items:
Testing occasions:
Home / Products List / CanNeed-PEBT-4000S PET Bottle Pressure Tester(Plus version)

PET Bottle Pressure Tester(Plus version)

Testing occasions:laboratory
Detection object:PET bottled drinks
Test items:Pressure/pressure resistance


CanNeed-PEBT-4000S PET Bottle Pressure Tester(Plus version) is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three international commonly used testing methods. CanNeed-PEBT-4000  is  able  to  test  the  pressure  capabilities  that  under  a  set pressure  or  the  burst  test  in  order  to  check  whether  the  PET  bottle  is  qualified  to  meet  the requirement of packaging industry.

By the means of replenishing pressurization, the pressurizing process was linearized, and to increase until reaching the set point or burst point.


CND-PEBT Software can display the curve of pressure and volume expansion, and provide the relevant temperature data


Auto clamping sample, Auto water filling, Auto testing

  1. 1) Three (3) international commonly used testing methods: Fill Ramp mode, Burst mode, User-defined mode
    2) Touch-screen controlled, display the real-time testing data
    3) During the testing, CND-PEBT software can display the curve of pressure and volume expansion, and provide the relevant temperature data.
    4) No need for high-pressure air supply


  •  Three (3) international commonly used testing methods
  •  CND-PEBT Professional software
  •  Preset testing mode and user-defined mode
  •  Display the curve of pressure and volume expansion during the test
  •  Monitor and record the water temperature during the test
  •  Applicable for different sizes of plastic bottles
  •  Touch-screen controlled
  •  RS232C data output
  •  With calibration function, convenience for calibrating
  •  With water filter system
  •  With a pressure calibration meter and a volume calibration flask

Technical Parameter

Operating Pressure Range : 0-300 Psi (0-20.7 bars)
Accuracy : ±3 Psi (±0.2 bar)
Pressure Measuring units : Psi, kg/cm2, bars, MPa (user defined)
Volume Expansion Measuring units : Milliliters (ml)
Pressure Source : Recommended to use Nitrogen gas (not supplied)
Water Source : 0.1 - 0.3 MPa tap water
Operating Temperature : 0-50℃
Power Supply : 110-120 or 220/240VAC @ 50/60 Hz
Expansion Capability : 2 L
Bottle Sizes Supported : Up to 3L (depending on expansion percentage)
Output Interface : Standard serial link
Dimensions : 830×580×1600 mm (W × D × H)
Weight : 120KG


Related Products