|
| |
Product Classification : Carton/label paper/Plastic film
|
| Total page:1
Current page:1 Total records:9 |
First | Previous | Next | Last
|
|
|
CanNeed-MBT-300 Hall Effect Thickness Gauge(Magnetic Bottle Thickness Gauge)
|
|
The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.
CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.
|
|
|
CanNeed-PAT-100 Ink Printing Abrasion Tester
|
|
CanNeed-PAT-100 Ink Printing Abrasion Tester is used for testing the abrasion wearing resistance of printing ink layer, PS plate photosensitive layer and surface coating of related products. It can effectively analyze the problems of poor abrasion wearing resistance, ink layer shedding, low printing resistance of PS plate and poor coating hardness of other products, etc. It can solve the problems of poor wear resistance, low friction resistance and easy shedding of the ink layer of printed products. Through the test, we can effectively control the production process and avoid the loss of return due to poor quality.
|
|
|
CanNeed-CPRT-1000 Carton Pressure Resistance Tester
|
|
CanNeed-CPRT-1000 Carton Pressure Resistance Tester is a kind of equipment used to test the compression resistance of cartons. It’s mainly used to test the compression strength of packaged products, in order to prevent deformation, damage and other adverse phenomena caused by insufficient packaging strength in the process of using, handling, stacking, storage and transportation.
There are three test modes applied by CanNeed-CPRT-1000: Pressure Resistance Test, Constant Value Test and Stacking Test.
The Pressure Resistance Test mode and measure the ultimate compressive strength and deformation of the cartons. The Constant Value Test mode and measure whether the carton can meet the requirements of the set fixed force value and deformation amount. And the Stacking Test can simulate the stacking status of the warehouse and test the stacking performance of the carton.
|
|
|
CanNeed-SPC SPC SoftWare
|
|
|
|
|
CanNeed-PBT-100 Paper Board Bursting Strength Tester
|
|
CanNeed-PBT-100 Paper Board Bursting Strength Tester is used for testing and analyzing the bursting strength of cardboard, carton and other paper materials. It’s suitable for all kinds of paperboard (including corrugated board and cardboard) with a burst resistance of 350Kpa-5500Kpa.The tester is designed in line with the International Inspection Standard “GBT1539-2007 Cardboard Breaking Resistance Determination”.
|
|
|
CanNeed-ATCT-1000 Automatic Tensile and Compression Tester
|
|
CanNeed-ATCT-1000 Automatic Tensile and Compression Tester is applicable for detecting the tensile stress and strength, breaking elongation, peel strength, 90° tear force, heat-sealing strength, adhesive strength, puncturing resistance force, low-speed unwrapping force and opening force on the samples involved of plastic film, laminated films, flexible packaging materials, adhesives and adhesive tapes, self-adhesive, rubber, paper and aluminum-plastic panel, etc. It’s developed and manufactured in terms of GBT16825-2022 and other standards.
|
|
|
CanNeed-CAT-10 Cobb Absorption Tester
|
|
CanNeed-CAT-10 Cobb Absorption Tester is designed to evaluate the water absorption rate of paper, thought testing the water absorbance of the materials when subjected to moist condition. It is suitable for sizing paper and water absorption on cardboard surface, not suitable for basis paper and embossed paper with basis weight less than 50g / m2, low sizing degree or more pinholes.It is designed and manufactured according to the national standard of GB/T 1540-2002, “Paper and board-Determination of water absorption-Cobb method”.
|
|
|
CanNeed-CRT-100 Crush Resistance Tester
|
|
CanNeed-CRT-100 Crush Resistance Tester is designed and used for testing corrugated board and paper, applies to Ring Crush Test (RCT), Edge Crush Test (ECT), Flat Crush Test (FCT), Peel Adhesive Test (PAT) , as well as Corrugating Medium Test (CMT) & Corrugated Crush Test (CCT) for corrugated paper diameter smaller than 60mm, which meets to the International Inspection Standards of GB/T 2679.8, GB/T 6546, GB/T 6548, etc.
CanNeed-CRT-100 has the functions of testing, converting, adjusting, memorizing, querying historical data, data printing and other functions included in the standard configuration, and has powerful data processing functions.
|
|
|
CanNeed-CTSA-100 Carton Tilt Sliding Angle Tester
|
|
CanNeed-CTSA-100 Carton Tilt Sliding Angle Tester is mainly used for testing the friction performance of corrugated cartons or other packaging products when they are sliding. When the boxes are stacking and transporting, if the surface friction coefficient is too small, it is easy to cause slip. With the help of CTSA-100 test, users can improve the sliding resistance of packaging. The CanNeed-CTSA-100 is developed and manufactured according to the international standard of DIN 53119-2-1997.
|
|
| Total page:1
Current page:1 Total records:9 |
First | Previous | Next | Last
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
