|
| |
Product Classification : All Products
|
|
Hallmag®-300 Hall Effect Thickness Gauge
|
Canneed-Hallmag-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.
Canneed-Hallmag-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.
|
|
|
CanNeed-L-100 CO2 Purity Tester
|
|
The “CanNeed-L-100 CO2 Purity Tester” adopts Alkali Absorption Method to measure the purity of CO2. It is widely used in gas monitoring station and brewery plants. CanNeed-L-100 is a CO2 purity tester with the highest accuracy of the world. Accuracy: 0.001%.
|
|
|
CanNeed-L-100 CO2 Purity Tester
|
|
The “CanNeed-L-100 CO2 Purity Tester” adopts Alkali Absorption Method to measure the purity of CO2. It is widely used in gas monitoring station and brewery plants. CanNeed-L-100 is a CO2 purity tester with the highest accuracy of the world. Accuracy: 0.001%.
|
|
|
CanNeed-IAM-30 Air Meter
|
If the “CanNeed-IAM-30 Air Meter” is used together with CanNeed-CAN-7001 CO2 Tester and Pressure Tester, it can test CO2 content as well as the air content.
It is designed according to ASBC Theory of American Society of Brewing Chemists, corresponding to “GB/T 4928 – 2001 Brewing Analysis Methods” and “GB/T 10792 – 1995 Carbonated Beverage Analysis Methods”. Therefore, the machine is widely used by Quality and Technical Supervision Bureau and beverage enterprises.
|
|
|
CanNeed-IAM-30 Air Meter
|
If the “CanNeed-IAM-30 Air Meter” is used together with CanNeed-CAN-7001 CO2 Tester and Pressure Tester, it can test CO2 content as well as the air content.
It is designed according to ASBC Theory of American Society of Brewing Chemists, corresponding to “GB/T 4928 – 2001 Brewing Analysis Methods” and “GB/T 10792 – 1995 Carbonated Beverage Analysis Methods”. Therefore, the machine is widely used by Quality and Technical Supervision Bureau and beverage enterprises.
|
|
|
CanNeed-CAN-5000 Air Meter
|
|
The “CAN-5000 Air Meter “ is for measuring the total air content in carbonated beverages filled in glass and PET bottles and cans. And the air content in the headspace volume. This instrument is recommended for testing air content where greater speed and accuracy is required. It is applicable to various size of bottles and cans.
|
|
|
CanNeed-CBT-500 Buckle Tester for Can Bottom (with dome growth measurement function)
|
|
CanNeed-CBT-500 Buckle Tester for Can Bottom determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses. It’s double stations and able to test both trimmed can and necked-in can without replacing the clamps and it’s suitable for cans with different can plugs, body diameters and heights.
|
|
|
CanNeed-CMT-400 Mobility / Lubricity Tester for Cans (Digital)
|
|
CanNeed-CMT-400 Mobility / Lubricity Tester for Cans is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.
|
|
|
CanNeed-RDG-100 Reform Dome Gauge
|
|
CanNeed-RDG-100 Reform Dome Gauge is used to measure the internal diameter(G) on the reform dome.
Such as 200, 202, 206, 209. Measuring dome integer inner diameter
Equipped with the Mitutoyo 0.01mm resolution digital indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
SeamSight®-V3 Full Automatic Seam Monitor
|
|
The CanNeed Seam Sight® professional seam measuring software will do the line positioning automatically and the measurement to be finished within 1 second! The software also adopted the data base management system, all the measurement data will be restored in the system data base, so that to enhance the software performance and more convenience in data management. The result statistic and result chart has been added in the data base screen for overview and comparison. Meanwhile, the measurement screen has been optimized for a vivid result display.
The CanNeed Seam Sight® Full Automatic Seam Monitor has adopted the advanced optical system and Golden Lens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The Seam Sight® system is equipped with the new seam measuring software Seam Sight® .
|
|
|
CanNeed-COG-100 Can Internal Size Gauge
|
|
CanNeed-COG-202 Can Internal Size Gauge is a digital gauge for quickly and accurately measuring the internal diameter and the flange width of empty cans.
CanNeed-COG-202 combines the advantages of Internal Diameter Gauge and Flange Width Gauge. If purchased the adapter of CanNeed-TRC-200 or CanNeed-TRC-400, it can auto calculate to achieve the actual internal diameter and avoid the measurement deviation caused by the “ellipse effect”. It can automatically position the middle line of the can body. The operators who lack experience can also measure accurately because of its reliable design and constant measuring pressure and angle. Equipped with the Mitutoyo 0.01mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
FWG-100-D, FWG-200-D, FWG-300-D Flange Width Gauge
|
|
The “CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge (digital)” is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
If purchased the adapter and cable, the gauges can be connected to a computer or SPC system for data collection, avoiding the manual recording and personal error.
|
|
|
CanNeed-FMS-2000 Automatic Front End Measure System
|
|
CanNeed-FMS-2000 Automatic Front End Measure System is used to measure Bottom Depth, Can Height & Topwall and Midwall Thickness of 2-pc can. It’s designed based on practical experience and applied for back end inspection. It can be used to test different sizes of cans, and there is no need to replace clamps.
Adopt standard calibration gauge, imported micrometer, and touch screen PLC control & display.
|
|
|
CanNeed-BPG-100 Bottle Profile Gauge
|
|
CanNeed-BPG-100 adopts optical and non-contact method, and precisely measures the parameters of the bottle mouth and closures to meet the requirement of the production and improve the quality, and to provide accurate data for customer. It can also inspect the wear condition of the mould to decide when to change.
|
|
|
CanNeed-CMT-300 Mobility/Lubricity Tester for Cans (Digital)
|
|
CanNeed-CMT-300 Mobility / Lubricity Tester for Cans is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.
Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
|
|
|
CanNeed-SFAT-100 Static Friction Angle Tester (Tilt Table)
|
|
CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.
|
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge is used to measure the coating thickness in real time, save time and improve the quality of the product. Non-contact optical measurement technology is applied to product development, laboratory quality control and online production control. In the solar energy industry, optical coating industry, food packaging,as well metal packaging, are very good choice to improve the surface quality of products: appearance, adhesion, corrosion resistance, abrasion resistance, scratch resistance.
|
|
|
CanNeed-CBT-CAL Calibration Cell For Buckle Tester
|
|
According to ISO and measuring management,users need to calibrate equipments at fixed period,but it is not convinient to send equipments to measuring organizations for calibration,then this CanNeed-CBT-CAL will help.
CanNeed-CBT-CAL is used to calibrate CanNeed-CBT-100/200/300, CanNeed-CBBT-100,CanNeed-CEBT-100, CanNeed-EBT-200/300
CanNeed-CBT-CAL display real time pressure,compare the value that displaying on CanNeed-CBT-100/200/300, CanNeed-CBBT-100, CanNeed-CEBT-100, CanNeed-EBT-200/300 to make the calibration.
|
|
|
CanNeed-TRK-6000S Oven Temperature Tracker
|
|
The CanNeed-TRK-6000 Oven Temperature Tracker is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.
|
|
|
CanNeed-CBT-400 Buckle Tester for Can Bottom
|
|
There is no need to replace the clamp when measuring necked-in cans and straight wall cans. CanNeed-CBT-400 can measure the cans with different diameters and heights.
Put the sample cans into the measuring station directly. There is no need to press the cans. It will automatically clamp and seal the cans by the cylinder and auto sealing device. When the operators press “TEST”, it will collect the buckle values of the cans.
|
|
|
Hallmag®-300 Hall Effect Thickness Gauge
|
Canneed-Hallmag-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.
Canneed-Hallmag-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.
|
|
|
CanNeed-CHG-200 Digital Can Height Gauge
|
|
CanNeed-CHG-200 Digital Can Height Gauge can quick measure the heights of cans, applicable for 2-pc cans, 3-pc cans and aerosol cans.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
CanNeed-FMD-200S Can Measure Desk for Front Stations
|
|
CanNeed-FMD-200S Can Measure Desk for Front Stations is developed on basis of the long experience of Front Stations in
2 -piece can product line. It is applied at the inspection points of 2 -piece can product line.
CanNeed-FMD-200S measures the Wall Thickness, Bottom Depth, Can Height. Please indicate the can type when ordering.
|
|
|
SeamSight®-VSM-6B Automatic Seam Monitor
|
SeamSight-VSM-6B Automatic Seam Monitor is a compact measuring system for quick and accurate automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy.
SeamSight-VSM-6B Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed-CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
|
|
|
CanNeed-ACTG-2000 Automatic Optical Coating Thickness Gauge (non-contact)
|
CanNeed-ACTG-2000 is a fully Automatic Optical Coating Thickness Gauge with unattended mode, it adopts non-contact optical measurement technology to measure the thickness and weight of dry film. It is a standard equipment in the canmaking industry to realize the continuous and efficient automatic inspection on the sample cans.
Compatible with straight-wall cans and finished cans. No changing parts are required for different can sizes in can heights and diameters.
|
|
|
CanNeed-MDER-C2 Multi-station Digital Enamel Rater for Cans
|
|
CanNeed-MDER-C2 is used to measure the coverage, the compactness and the electric current value of the enamel coating inside the food and beverage cans. The contents will erode the metallic material and affect the quality and storage of products if the enamel coating inside the cans is not integrated. The machine adopted semi-automatic technology, more efficient and more effectively reducing the human errors. CanNeed-MDER-C2 is the standard of can making industry.
|
|
|
CanNeed-ADER-E1000 Automatic Digital Enamel Rater for Ends
|
CanNeed-ADER-E1000 is used to test the coverage of the enamel coating inside ends.(enamel coating compactness, mA)
ADER-E1000 automatically place the end into measuring station, then get the current value (mA)of the end after 4 seconds, and also display Max current value and average current value at the same time. If any failure in test caused by poor contact, there will be a reminder and warning. Data can be output to PC via RS 232 C interface.
ADER-E1000 can detect the exposed metal quicker with optimized electric design to make test quicker, more reliable and accurate.
|
|
|
CanNeed-ADER-C3100 Automatic Digital Enamel Rater for Cans
|
|
CanNeed-ADER-C3100 is a fully automatic digital enamel rater with unattended operation. It’s is used to measure the coverage, the compactness and the electric current value of the enamel coating inside the beverage cans. The contents will erode the metallic material and affect the quality and storage of products if the enamel coating inside the cans is not integrated. The machine adopted fully automaticinspecting technology, more efficient and more effectively reducing the human errors. It is the standard for evaluating can quality in can-making industry.
|
|
|
CanNeed-SFAT-100 Static Friction Angle Tester (Tilt Table)
|
|
CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.
Three containers are placed on the table in a pyramidal configuration. After the start button is pushed, an electric motor increases the angle of inclination of the table. The bottom two containers are constrained and do not move during testing. When the tilt angle becomes great enough to overcome the frictional forces between the containers, the top container begins to slide and will contact the trip bar, which stops the drive motor and simultaneously applies a brake to the inclined table. This prevents coasting and inadvertent measurements of erroneously high tilt angles.
Applicable for: glass bottles, plastic bottles, aluminum bottles and cans, etc.
|
|
|
CanNeed-OCTG-4000 Thickness Gauge and Wet Film Thickness
|
|
Measure real-time thickness of coating and welt film.Save time and improve quality.
Deliver real-time results on single or dual layers.
Adopt non-contact optical technology,applicable for R&D,QC,and on-line production.
In solar energy,optical filming,food packaging and metal packaging industries, improve surface quality such as appearance, adhesion, corrosion resistance, wear resistance, and scratch resistance.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
