Dual scale, calibrated in millimeters and inches, designed for all size bottles. Gauge may be preset in inches or millimeters to check fill height level on production line or may be used to measure exact fill point of bottle and then compared to standard. Rule may be raised or lowered to compensate for the thickness of various crowns. Size: 6" X 7".

The “CanNeed-STT-CAL Torque Tester Calibration Tool” is used for calibrating the torque testers. Adopted the precision weight, can achieve the accurate torque value.

If the “CanNeed-IAM-30 Air Meter” is used together with CanNeed-CAN-7001 CO2 Tester and Pressure Tester, it can test CO2 content as well as the air content.
It is designed according to ASBC Theory of American Society of Brewing Chemists, corresponding to “GB/T 4928 – 2001 Brewing Analysis Methods” and “GB/T 10792 – 1995 Carbonated Beverage Analysis Methods”. Therefore, the machine is widely used by Quality and Technical Supervision Bureau and beverage enterprises.

Measuring principle:
After piercing the bottles or cans with the CO2 Tester, the gas in the bottled beer or canned beer will enter IAM-30, touch the alkaline liquid, then CO2 will be absorbed by alkaline liquid. The remaining gas (usually, N2 and O2) will concentrate to the top of measuring tube. The gas volume will be read through the graduation of measuring tube.

The machine adopted fully automatic inspecting technology, more efficient and more effectively reducing the human errors. It is the standard for evaluating can quality in can-making industry.

CanNeed-ACBT-1000 is a full automatic buckle tester for can bottom with unattended operation.It determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses with dome growth function.

CanNeed-ACTG-2000 is a fully Automatic Optical Coating Thickness Gauge with unattended mode, it adopts non-contact optical measurement technology to measure the thickness and weight of dry film. It is a standard equipment in the canmaking industry to realize the continuous and efficient automatic inspection on the sample cans.

Compatible with straight-wall cans and finished cans. No changing parts are required for different can sizes in can heights and diameters.

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.

CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.

CanNeed-ACBT-1100 is a full automatic buckle tester bottom for cans with unattended operation. It used to test the maximum pressure before can bottom starts to deform, and with dome growth function. CanNeed-ACBT-1100 is a standard instrument for can-making industry to achieve continuous and efficient automatic detection.

CanNeed-ACBT-1100 is equipped with auto sampling device which conveys the can to the testing area automatically. Swinging mechanical hand pushes the can to the testing station and it will measure and sort unqualified products automatically. It is also equipped with unqualified products samples retention channel, to facilitate users to analyze unqualified products.

CanNeed-AAXL-1100 is a full automatic can axial load measure system with unattended operation. It can measure the axial load of the 2-piece can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.

CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.

Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.

Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.

The “CanNeed-MBT-300 Hall Effect Thickness Gauge (Magnetic Bottle Thickness Gauge)” is a refined portable thickness gauge. It is used to measure the thickness of nonmagnetic material, such as plastic, glass, synthetics, aluminum and titanium, etc. The measurement accuracy is undistorted by the samples’ shapes.

CanNeed-MBT-300 is based on the theory of Hall Effect. For test, place the steel ball on one side of the sample and the probe on the other side. The Hall Effect sensor on the probe measures the distance from the probe tip to the steel ball. The calculator will display the real thickness readings.

The ‘CanNeed-CAG-100 Crown Angle Gauge" is to make the fast and accurate test of the a angle of the crown ends.

CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.

Three containers are placed on the table in a pyramidal configuration. After the start button is pushed, an electric motor increases the angle of inclination of the table. The bottom two containers are constrained and do not move during testing. When the tilt angle becomes great enough to overcome the frictional forces between the containers, the top container begins to slide and will contact the trip bar, which stops the drive motor and simultaneously applies a brake to the inclined table. This prevents coasting and inadvertent measurements of erroneously high tilt angles.

Applicable for: glass bottles, plastic bottles, aluminum bottles and cans, etc.

CanNeed-SFAT-100 Static Friction Angle Tester enables accurate measurement of container lubricity and coefficient of static friction.

Three containers are placed on the table in a pyramidal configuration. After the start button is pushed, an electric motor increases the angle of inclination of the table. The bottom two containers are constrained and do not move during testing. When the tilt angle becomes great enough to overcome the frictional forces between the containers, the top container begins to slide and will contact the trip bar, which stops the drive motor and simultaneously applies a brake to the inclined table. This prevents coasting and inadvertent measurements of erroneously high tilt angles.

Applicable for: glass bottles, plastic bottles, aluminum bottles and cans, etc.