|
| |
Product Classification : All Products
|
|
CanNeed-CMT-300 Mobility/Lubricity Tester for Cans (Digital)
|
|
CanNeed-CMT-300 Mobility / Lubricity Tester for Cans is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.
Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
|
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge is used to measure the coating thickness in real time, save time and improve the quality of the product. Non-contact optical measurement technology is applied to product development, laboratory quality control and online production control. In the solar energy industry, optical coating industry, food packaging,as well metal packaging, are very good choice to improve the surface quality of products: appearance, adhesion, corrosion resistance, abrasion resistance, scratch resistance.
|
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge
|
|
CanNeed-OCTG-2000 Coating Thickness Gauge is used to measure the coating thickness in real time, save time and improve the quality of the product. Non-contact optical measurement technology is applied to product development, laboratory quality control and online production control. In the solar energy industry, optical coating industry, food packaging,as well metal packaging, are very good choice to improve the surface quality of products: appearance, adhesion, corrosion resistance, abrasion resistance, scratch resistance.
|
|
|
CanNeed-CC-1000 Can Colorimeter
|
1. Special and professional design for samples in column shape. No need to cut cans. Easy to operate and sample-saving.
2. Spectrum gauge with linear array CCD analyzes the spectrum with resolution of up to 1nm.
3. High-speed test. Single test needs less than 50ms and one sample needs less than 1s.
4. Light source consists of several LEDs. Energy is even in the whole spectrum. Long Lifetime and stable.
5. Result is stable. Repeatability up to 0.05 △E.
6. Light source is conducted and spectrum is reflected by optical fiber, which makes the gauge accurate and compact.
|
|
|
CanNeed-DST-100 Seal Tester for Steel Drum
|
|
CanNeed-DST-100 Seal Tester for Steel Drum is developed to use compressed air in the steel drum (for example paint drum) to test the inner pressure resistance. It has the advantages of simple structure, convenient use, is the steel drum manufacturers/users, as well as inspection institutions’ preferred testing equipment.
|
|
|
CanNeed-F-125 Sterilization Temperature Monitor (F0 Value Monitor)
|
|
CanNeed-CAN-F-125 Sterilization Temperature Monitor (F0 Value Monitor) has been chosen by many
beverage and canned food factories.
Applicable to different kinds of sterilization equipments and different place that require temperature monitoring: sterilization kettle (autoclave), Spray sterilization machine, Water sink sterilization machine, warehouse, transportation vehicles, etc.
Applicable to different kinds of products: canned food, beverage, beer, pouch food, jelly, etc.
Applicable to different kinds of packaging: metal cans, glass or PET bottles, pouches, plastic boxes, etc.
|
|
|
CanNeed-FSF-100 Tinplate Holder
|
|
The CanNeed FSF-100 Tinplate Holder is used together with the CanNeed-DER-400 Digital Enamel Rater and the vacuum device to test the integrality of the enamel coating inside the tinplate.
|
|
|
CanNeed-ACH-100 Aerosol Curl Height Gauge
|
|
CaNneed-ACH-100 Aerosol Curl Height Gauge is used for measuring the contact height of the curl 1” aperture of aerosol cans. ACH-100 is the Industry Standard.
|
|
|
CanNeed-OCTG-4000 Thickness Gauge and Wet Film Thickness
|
Measure real-time thickness of coating and welt film.Save time and improve quality
Deliver real-time results on single or dual layers
Adopt non-contact optical technology,applicable for R&D,QC,and on-line production
In solar energy,optical filming,food packaging and metal packaging industries, improve surface quality such as appearance, adhesion, corrosion resistance, wear resistance, and scratch resistance.
|
|
|
CanNeed-DHG-500 Digital Can Height Gauge
|
|
The CanNeed-DHG-500 Digital Can Height Gauge can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
SeamSight®-VSM-6D Automatic Seam Monitor
|
SeamSight-VSM-6D Automatic Seam Monitor uses the CanNeed SPC data collection system, The actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
The software also adopted the data base management system, all the measurement data will be restored in the system data base, so that to enhance the software performance and more convenience in data management. The result statistic and result chart has been added in the data base screen for overview and comparison. Meanwhile, the measurement screen has been optimized for a vivid result display.
|
|
|
SeamSight®-VSM-6D Automatic Seam Monitor
|
SeamSight-VSM-6D Automatic Seam Monitor uses the CanNeed SPC data collection system, The actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
The software also adopted the data base management system, all the measurement data will be restored in the system data base, so that to enhance the software performance and more convenience in data management. The result statistic and result chart has been added in the data base screen for overview and comparison. Meanwhile, the measurement screen has been optimized for a vivid result display.
|
|
|
CanNeed-DER-4 Digital Enamel Rater
|
|
The CanNeed-DER-4Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.
CanNeed-DER-4 is the industry standard. The new CanNeed-DER-4Enamel Rater instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and also different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
|
|
|
CanNeed-ALT-800 Leak Tester for Aerosol can
|
|
Canneed-ALT-600/ALT-800 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans. ALT-600 can test 6 cans at the same time, and ALT-800 can test 8. The permeability tester for aerosol cans blows up the cans up to a maximum of 10 bar and submerges them under water. At the leaking spots of the can then visible air-bubbles escape.
|
|
|
CanNeed-ALT-100 Leak Tester for Aerosol can
|
|
CanNeed-ALT-100 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans in a water bath. The can is freely suspended and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. Test pressure 8 - 10 bar. The test procedure is performed semi-automatically. The tester is suitable for all aerosol can diameters. The maximum can height is 300 mm.
|
|
|
CanNeed-AFMD-200 Aerosol Can Measure Desk For Front End
|
|
AFMD-200 Aerosol Can Measure Desk for Back End is used in aerosol can product line. Measures bottom &wall thickness, can body diameter, can height. Pls state can type when place an order
|
|
|
CanNeed-ACMD-200 Aerosol Can Measure Desk For Back End
|
CanNeed ACMD-200 Aerosol Can Measure Desk for Back End is used to the production line of aerosol cans.
Measures bottom & wall thickness, bottom depth, can height, external & internal diameter.
Please specify the can types when ordering.
|
|
|
CanNeed-ABT-200 Burst Buckling Tester for aerosol cans
|
Aerosol can manufacturers need not only to save cost but also to ensure product quality, they are in a great need about devices which can accurately measure and assess the performance of the aerosol cans.
CanNeed-ABT-200 Burst Buckling Tester for Aerosol Cans is used for testing the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts.
|
|
|
CanNeed-ABT-100 Burst Buckling Tester for Aerosol Cans
|
|
CanNeed-ABT-100 Burst Buckling Tester for Aerosol Cans is used to determine the buckle value of bottom (dome) and Top end of aerosol cans and the pressure at which the can bursts. With the special designed clamp, it is able to measure the dome or bottom free ends independently. At high pressures from approximately 22 - 28 bars, it may happen that deformations of the valve and a higher burst pressure.
|
|
|
CanNeed-ZM-10 Portable Digital Body Blank Gauge
|
The “CanNeed ZM-10 Digital Body Blank Gauge” is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement. It’s particularly suitable for the production line inspection after the adjustment.
Adopting aluminum alloy material so that it is quite light and convenient.
|
|
|
CanNeed-CST-100 Can Seal Tester (Vacuum mode)
|
|
CanNeed-CST-100 Can Seal Tester (Vacuum mode) is for testing the secure seal of the 3-pc cans by applying the vacuum pressure to see whether the cans leak. It can test 1 (one) round can at each test.
Test method: Fill the sample can with water, cover the transparent platen on the open top, turn on the vacuum pump to generate the negative pressure, and then observe whether there are air bubbles on the can body, if the air bubbles come out continually, that means leakage occurred.
CanNeed-CST-100 is applicable for different can sizes. Please order different platens accordingly.
|
|
|
CanNeed-CCAT-100 Can Comprehensive Abrasion Tester
|
|
Simple operation,no special skills. After well clamped the sample can,adjust testing pressure load,and set testing frequency and time, CanNeed-CCAT-100 will imitate the clashing of cans, wearing-resisting property can be evaluated by observing.
|
|
|
CanNeed-CCAT-100 Can Comprehensive Abrasion Tester
|
|
Simple operation,no special skills. After well clamped the sample can,adjust testing pressure load,and set testing frequency and time, CanNeed-CCAT-100 will imitate the clashing of cans, wearing-resisting property can be evaluated by observing.
|
|
|
CanNeed-CSG-A Countersink Gauge for Aerosol Cans (digital)
|
|
CanNeed-CSG-A Countersink Gauge (digital) is a digital gauge for measuring countersink depth parameters of aerosol cans. Equipped with Zero-Adjusting calibration platform and protection piece.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection, avoiding that the persons record the data. It can also used together with the seam sight monitor and output the measuring data to the PC.
|
|
|
CanNeed-ACH-200 Aerosol Curl Height Gauge
|
|
Canneed-ACH-200d Aerosol Curl Height Gauge is used for measuring the contact height of the curl 1” aperture of aerosol cans. ACH-200d is the Industry Standard.
|
|
|
CanNeed-CSG-200S Countersink Gauge (with data output button)
|
|
The “CanNeed-CSG-200 Countersink Gauge (digital)” is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can).
|
|
|
CanNeed-CSG-200S Countersink Gauge (with data output button)
|
|
The “CanNeed-CSG-200 Countersink Gauge (digital)” is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can).
|
|
|
CanNeed-CSRT-100 Coating Scratch Resistance Tester
|
|
Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.
|
|
|
CanNeed-CSRT-100 Coating Scratch Resistance Tester
|
|
Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
Clamp the sample, adjust the testing pressure load and move the sample relatively to the tipped needle. If any scratches, there will be readings displaying on the machine.
|
|
|
CanNeed-WOM-4C Welding Overlap Monitor
|
|
The CanNeed-WOM-4C Welding Overlap Monitor is used to measure the length and thickness of side seam welding overlap. It’s equipped with the most advanced optical system and Golden LensTM, which ensured the high image Definition.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
