Canneed Instrument Ltd.|www.canneed.com 肇庆市嘉仪仪器有限公司,SMT点料机,SMD点料机,点料机,Canneed Instrument Ltd.
󰀥
Products List : 󰅞󰅟
    • products-show.asp?id=44&clickid=test_menu_2_26
    • SeamSight-C
    • SeamSight-C Full Automatic Seam Monitor
    • SeamSight® Full Automatic Seam Monitor has adopted the advanced optical system and GoldenLens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The SeamSight® system is equipped with the new seam measuring software SeamSight® Professional Software. Which will do the line positioning automatically and the measurement to be finished within 1 second!
    • products-show.asp?id=43&clickid=test_menu_2_26
    • SeamSight-B
    • SeamSight-B Full Automatic Seam Monitor
    • SeamSight® Full Automatic Seam Monitor has adopted the advanced optical system and GoldenLens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The SeamSight® system is equipped with the new seam measuring software SeamSight® Professional Software. Which will do the line positioning automatically and the measurement to be finished within 1 second!
    • products-show.asp?id=48&clickid=test_menu_2_26
    • SeamSight VSM-6C
    • VSM-6C Automatic Seam Monitor
    • The CanNeed-VSM-6C Automatic Seam Monitor is a compact measuring system for quick and accurate automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy. The CanNeed-VSM-6C Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
    • products-show.asp?id=61&clickid=test_menu_2_26
    • CanNeed-STR-100
    • CanNeed-STR-100 Seam Stripper
    • The automatic “CanNeed-STR-100 Seam Stripper” is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more frequent inspections. Tooling quick change in few seconds. Models are available for most common can sizes of beverage and food cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand.
    • products-show.asp?id=40&clickid=test_menu_2_26
    • CanNeed-SM-24
    • CanNeed-SM-24 Electric Belt Drive Seamer
    • “CanNeed-SM-24 Electric Belt Drive Seamer” (Desktop model) enables the users to do more lab tests. Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring. It is much more convenient for those lab tests, fast, easy and high efficiency
    • products-show.asp?id=58&clickid=test_menu_2_26
    • CanNeed-CSS-1000
    • CanNeed-CSS-1000 Anti-noise Seam Saw
    • “CanNeed -CSS-1000 Anti-noise Seam Saw” is provided with an anti-noise design and a special guide for 2-and 3-piece cans with 65mm dia, such as beer cans and 209 cans. The cutting process is so precise, quick, safe and convenient to ensure precise cutting effects without distorting the cans. The seam image on Canneed series Seam Sight TM automatic seam measuring systems gets thereby every clear and improves measurement speed and reliability.
    • products-show.asp?id=33&clickid=test_menu_2_26
    • CanNeed-CSS-100B
    • CanNeed-CSS-100B Anti-noise Seam Saw
    • “CanNeed -CSS-100B Anti-noise seam saw” is provided with an anti-noise design and a special guide for 2- and 3-piece cans (65 mm dia.). Special seam circular saw with double cut for can double seam inspections. The CanNeed -CSS-100B was specially designed for 2 and 3-piece cans. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
    • products-show.asp?id=34&clickid=test_menu_2_26
    • CanNeed-CSS-2000
    • CanNeed-CSS-2000 Seam Saw
    • CanNeed-CSS-2000 Seam Saw is a special unit to cut the cans with double seam for inspection. Sample moving platform is assembled on linear rail with precise cutting effect to ensure that cutting image is very clear when inspecting the seam quality with CanNeed Seam Sight automatic seam monitor. Linear rail for can moving is installed to make the perfect linear cutting. Configured with extreme hard blade, it is durable and enables the cutting clear without burrs.
    • products-show.asp?id=63&clickid=test_menu_2_26
    • SeamSight-3B
    • SeamSight-3B Portable Full Automatic Seam Monitor
    • products-show.asp?id=56&clickid=test_menu_2_26
    • CanNeed-CSS-P2
    • CanNeed-CSS-P2 Portable Seam Saw
    • products-show.asp?id=39&clickid=test_menu_2_26
    • CanNeed-SCG-110
    • CanNeed-SCG-110 Seamer clearance Gauge and Seam Monitor
    • The CanNeed-SCG-110 Clearance gauge, a quick and accurate way to set up seamers. To measure the roll height off the chuck and the lateral distance between the roll and chuck.
    • products-show.asp?id=36&clickid=test_menu_2_26
    • CanNeed-RPG-100
    • CanNeed-RPG-100 Profile Gauge for Roll and Chuck
    • The CanNeed-RPG-100 is able to scan profiles of seaming Rolls and Chucks (or other tooling - including carbide and ceramic tools) easily and quickly. The system can be used for acceptance testing for new seaming rolls or chucks, for quality assurance purposes and for stress analysis. Monitor tooling wear to replace rolls and chucks only when they need to be replaced
    • products-show.asp?id=31&clickid=test_menu_2_26
    • CanNeed-CAN-1050D
    • CanNeed-CAN-1050D Digital Can Closing Force Gauge
    • “CanNeed-CAN-1050d Can Closing Force Gauge” is for measuring the force of seaming head of the seaming machine. By using CanNeed-CAN-1050d, producers can avoid product defects caused by over plating: sharp edge, seam breakage, body deformation, body hook overlength, over large countersink and so on. In the meantime, producers can also avoid product defects caused by too small pallet lift force: slippery cans, too short hook and so on.
    • products-show.asp?id=239&clickid=test_menu_2_26
    • CanNeed-CAN-10774
    • The Pin Height Gauge is commonly used in the initial setup of the seamer to ensure double seaming performance and air removal. All working surfaces are hardened and accurately ground. The base measures 0.75” wide x 5.25” long (19mm x 130mm). Includes a 3” extension providing a range of 9.25” (230mm).
    • products-show.asp?id=232&clickid=test_menu_2_26
    • CanNeed-ASTG-1000
    • The“CanNeed-ASTG-1000 Automatic Seam Thickness Gauge” is used to 360 degree automatic measure the seam thickness.Adopt automatic can rotation to multi-point measurement,that makes it quite easy to find out locations of the seam defects.Fast and correct measurements,and avoid any error caused by personal operation.The result will show on the touch screen.
    • products-show.asp?id=82&clickid=test_menu_2_26
    • CanNeed-STG-200-d
    • CanNeed-STG-200-d Seam Thickness Gauge
    • The “CanNeed-STG-200-d Seam thickness gauge (Digital)” is used to measure the Seam thickness of cans. With measure angle compensation. The center measure point can be adjusted. Cans can be auto - positioned in the center easily during measuring. With the Mitutoyo 0.01mm Resolution Digital Indicator.
    • products-show.asp?id=112&clickid=test_menu_2_26
    • CanNeed-CSG-200S
    • CanNeed-CSG-200S Countersink Gauge (with data output button)
    • The “CanNeed-CSG-200 Countersink Gauge (digital)” is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can). With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauge can be connected to a computer or SPC system via the adapter and cable, so that to avoid the manual recording and personal error. The gauge can also combine with Canneed Seam Monitors and import the measurement data into computer.
    • products-show.asp?id=93&clickid=test_menu_2_26
    • CanNeed-SLG-d
    • CanNeed-SLG-d Seam Length Gauge (Digital)
    • The CanNeed-SLG-d Seam Length Gauge (Digital) is used to measure the Seam length (Seam height) Reliable design, invariablenes measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. The can body was aligned vertically, measurement results are more reliable. Applicable for different types of cans. The gauges can be connected to a computer or SPC system via the adapter and cable, so that to avoid the manual recording and personal error.
    • products-show.asp?id=244&clickid=test_menu_2_26
    • CanNeed-CSM-207/208
    • CanNeed-CSM-208, CanNeed-CSM-207 Can Seam Micrometers (Fine tuning)
    • CanNeed CSM series Can Seam Micrometers are use for measuring the seam thickness and length. The fine tuning function helps to avoid the deviation caused by over rotation. CanNeed-CSM-208 is applicable to measure the seam thickness and length of flat bottom straight wall cans. CanNeed-CSM-207 is applicable to measure the seam thickness and length of aerosol cans and necked-in cans.
    • products-show.asp?id=231&clickid=test_menu_2_26
    • CanNeed-ADER-E1000
    • Automatic Digital Enamel Rater for Ends
    • CanNeed-ADER-E1000 is used to test the coverage of the enamel coating inside ends.(enamel coating compactness, mA)
    • products-show.asp?id=154&clickid=test_menu_2_26
    • CanNeed-CCAT-100
    • Can Comprehensive Abrasion Tester
    • CanNeed-CCAT-100 will imitate the clashing of cans during transportation, wearing-resisting property can be evaluated by observing.
    • products-show.asp?id=185&clickid=test_menu_2_26
    • CanNeed-MDER-10
    • Multi-station Digital Enamel Rater for Ends
    • CanNeed-MDER-10 Multi-station Digital Enamel Rater For Ends is used to test the integrity of the inner coating (inner coating density and current value) of the 10 ends at one time. If the inner coating is incomplete and the contents will corrode the metal and affect the quality and storage of the product.
    • products-show.asp?id=265&clickid=test_menu_2_26
    • CanNeed-MDER-C2
    • Multi-station Digital Enamel Rater for Cans
    • CanNeed-MDER-C2 is used to measure the coverage, the compactness and the electric current value of the enamel coating inside the food and beverage cans. The contents will erode the metallic material and affect the quality and storage of products if the enamel coating inside the cans is not integrated. The machine adopted semi-automatic technology, more efficient and more effectively reducing the human errors. CanNeed-MDER-C2 is the standard of can making industry.
    • products-show.asp?id=106&clickid=test_menu_2_26
    • CanNeed-CSRT-100
    • CanNeed-CSRT-100 Coating Scratch Resistance Tester
    • Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
    • products-show.asp?id=251&clickid=test_menu_2_26
    • CanNeed-SFAT-100
    • Applicable to: glass bottles, plastic bottles, aluminum bottles and cans, etc. Enables accurate measurement of container lubricity and coefficient of static friction
    • products-show.asp?id=105&clickid=test_menu_2_26
    • CanNeed-CMT-200
    • CanNeed-CMT-200 Mobility / Lubricity Tester for Cans
    • The “CanNeed-CMT-200 Mobility / Lubricity Tester for Cans” is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks. Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
    • products-show.asp?id=107&clickid=test_menu_2_26
    • CanNeed-CTG-310
    • Coating Thickness Gauge
    • CanNeed-CTG-310 Coating Thickness Gauge is used to test the coating thickness(coating weight per unit area, g/m2). When equipped with “Hover Probe”, it can measure the coating thickness of plate sheets. When equipped with can body testing clamp, it can test the coating thickness of can body.
    • products-show.asp?id=173&clickid=test_menu_2_26
    • CanNeed-DER-400
    • Digital Enamel Rater
    • The CanNeed-DER-400 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.
    • products-show.asp?id=172&clickid=test_menu_2_26
    • CanNeed-DER-4
    • CanNeed-DER-4 Digital Enamel Rater
    • The CanNeed-DER-4 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.
    • products-show.asp?id=50&clickid=test_menu_2_26
    • CanNeed-CND-TRK-300
    • CanNeed-TRK-300 Oven Temperature Tracker
    • The “CanNeed-TRK-300 Oven Temperature Tracker” is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.
    • products-show.asp?id=181&clickid=test_menu_2_26
    • CanNeed-TRK-6000S
    • CanNeed-TRK-6000 Oven Temperature Tracker
    • The “CanNeed-TRK-6000 Oven Temperature Tracker” is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.
    • products-show.asp?id=148&clickid=test_menu_2_26
    • CanNeed-AXL-4000
    • Axial Load Tester
    • CanNeed-AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
    • products-show.asp?id=153&clickid=test_menu_2_26
    • CanNeed-CBT-400
    • Buckle Tester Bottom for Can
    • CanNeed-CBT-400 Buckle Tester Bottom for Cans determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses.
    • products-show.asp?id=151&clickid=test_menu_2_26
    • CanNeed-CBBT-100
    • CanNeed-CBBT-100 Burst and Buckle Tester for Can
    • The “Canneed-CBBT-100 Burst and Buckle Tester Bottom for Cans” determines the buckle pressure and the burst pressure of the 2 pc can.
    • products-show.asp?id=155&clickid=test_menu_2_26
    • CanNeed-CEBT-200
    • Buckle Tester for Can and End
    • Testing method: place the seamed 3 piece cans into the CanNeed-CEBT-100 testing base frame, then start the testing. For alternative, to seam the Ends onto a 2 piece can by the SM-24 Belt Drive Electric Seamer (a Canneed desktop seamer for laboratory), then cut off the bottom of that 2 piece can and place it into the CanNeed-CEBT-100 for testing.
    • products-show.asp?id=150&clickid=test_menu_2_26
    • CanNeed-BMS-1000
    • Automatic Can Measure System for Back End
    • CanNeed-BMS-1000 Automatic Can Measure System for Back End is used to measure Flange Width, Can Height & Internal Diameter of 2-pc can. It’s designed based on practical experience and applied to back end inspection. It can be adjusted rapidly and applicable for various can height.
    • products-show.asp?id=138&clickid=test_menu_2_26
    • CanNeed-DHG-300
    • CanNeed-DHG-300 Digital Can Height Gauge
    • The “CanNeed-DHG-300 Digital Can Height Gauge” can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
    • products-show.asp?id=129&clickid=test_menu_2_26
    • CanNeed-FWG-100-d
    • CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge (digital)
    • The “CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge” is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
    • products-show.asp?id=97&clickid=test_menu_2_26
    • CanNeed-IDG-100
    • CanNeed-IDG-100/200/300 Can Internal Diameter Gauge
    • The “CanNeed-IDG-100 Internal Diameter of Can” is used to measure the internal diameter of small cans, such as 200, 202, 206, 209. The “CanNeed-IDG-200 Internal Diameter of Can” is used to measure the internal diameter of larger cans. According to clients’ request,
    • products-show.asp?id=149&clickid=test_menu_2_26
    • CanNeed-AXL-CAL
    • CanNeed-AXL-CAL-4000 Calibration Cell For Axial Load Tester
    • CanNeed-AXL-CAL-10000 is used to calibrate the CanNeed-AXL-10000 Axial Load Tester. Place the CanNeed-AXL-CAL-10000 into the testing platform and rise up gradually until reaches the top plate, then the CanNeed-AXL-CAL-10000 will display the real time pressure, compare the value that displaying on the CanNeed- AXL-10000 to make the calibration.
    • products-show.asp?id=242&clickid=test_menu_2_26
    • CanNeed-CBT-CAL
    • CanNeed-CBT-CAL is used to calibrate CanNeed-CBT-100/200/300, CanNeed-CBBT-100, CanNeed-CEBT-100, CanNeed-EBT-200/300
    • products-show.asp?id=146&clickid=test_menu_2_26
    • CanNeed-PTT-400
    • Pop & Tear Tester
    • CanNeed PTT-400 Pop & Tear Tester was developed for testing different kinds of easy open ends. It can measure the Pop & Tear force, ring rotary force and ring detaching force.
    • products-show.asp?id=234&clickid=test_menu_2_26
    • CanNeed-PTT-300
    • CanNeed-PTT-300 Pop & Tear Tester
    • The “CanNeed-PTT-300 Pop & Tear Tester” was developed for testing different kinds of easy open ends.
    • products-show.asp?id=143&clickid=test_menu_2_26
    • CanNeed-EMS-200
    • CanNeed-EMS-200 Multiple Lid Measurement Station
    • CanNeed-EMS-200 Multiple Lid Measurement Station is for measuring the End Curl Outer Diameter, End Curl Height, Countersink and Thimble Depth. The end countersink is the height of countersink position minus the thickness of plate.
    • products-show.asp?id=142&clickid=test_menu_2_26
    • CanNeed-ELT-100
    • CanNeed-ELT-100 Leak Tester for End
    • The “CanNeed-ELT 100 Leak Tester for End” is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area.
    • products-show.asp?id=90&clickid=test_menu_2_26
    • CanNeed-CDG-100
    • CanNeed-CDG-100 Curl Diameter Gauge
    • CanNeed-CDG-100 Curl Diameter Gauge is a Digital gauge for measuring curl diameter of ends. It is applicable for different round ends and square ends.
    • products-show.asp?id=100&clickid=test_menu_2_26
    • CanNeed-ECH-d
    • CanNeed-ECH-d End Curl Height Gauge
    • The “CanNeed -ECH-d End Curl Height Gauge” is a digital gauge for measuring the curl height of ends, applicable for both round ends and square ends. With the Mitutoyo 0.01mm resolution digital indicator. If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
    • products-show.asp?id=141&clickid=test_menu_2_26
    • CanNeed-PTG-100
    • CanNeed-PTG -100 Digital Plate Thickness Gauge
    • products-show.asp?id=101&clickid=test_menu_2_26
    • CanNeed-ECW-d
    • products-show.asp?id=86&clickid=test_menu_2_26
    • CanNeed-BPT-4000
    • CanNeed-BPT-4000 Ramp Pressure Tester
    • products-show.asp?id=85&clickid=test_menu_2_26
    • CanNeed-BPT-4
    • CanNeed-BPT-4 Ramp Pressure Tester(automatic)
    • products-show.asp?id=293&clickid=test_menu_2_26
    • CanNeed-BPT-5
    • CanNeed-BPT-5 Ramp Pressure Tester (Automatic & Desktop)
    • CanNeed-BPT-5 Ramp Pressure Tester (Automatic & Desktop) is able to test the resistance of gla bottles. It’s able to perform both acceptance test and burst test. 2 stations enable the high speed and efficiency. Controlled by PLC and configured with touch scree Automatic affusion, automatic clamping and automatic test are available. Pressurizing process controlled by servo system. Real-time data is displayed and test result is recorded automatically.
    • products-show.asp?id=37&clickid=test_menu_2_26
    • CanNeed-GPG-100
    • CanNeed-GPG-100 General Profile Gauge
    • products-show.asp?id=88&clickid=test_menu_2_26
    • CanNeed-VLT-100
    • CanNeed-VLT-100 Vertical Load Tester
    • products-show.asp?id=303&clickid=test_menu_2_26
    • CanNeed-MBT-300
    • products-show.asp?id=87&clickid=test_menu_2_26
    • CanNeed-GIT-100
    • CanNeed-GIT-100 Glass Bottle Impact Tester
    • products-show.asp?id=120&clickid=test_menu_2_26
    • CanNeed-VAT-400
    • CanNeed-VAT-300 Perpendicularity tester for bottle
    • The CanNeed-VAT-300 Perpendicularity tester for bottle (Auto) is for measuring the perpendicularity deviation of glass bottles. Clamping a sample and rotating a circle, the vertical axis deviation can be read directly in the digital automatic calculator.
    • products-show.asp?id=81&clickid=test_menu_2_26
    • CanNeed-BBTG-200
    • CanNeed-BBTG-200 Bottle Bottom Thickness Gauge (digital)
    • products-show.asp?id=108&clickid=test_menu_2_26
    • CanNeed-BWTG-200
    • BWTG-200 Bottle Wall Thickness Gauge
    • products-show.asp?id=251&clickid=test_menu_2_26
    • CanNeed-SFAT-100
    • Applicable to: glass bottles, plastic bottles, aluminum bottles and cans, etc. Enables accurate measurement of container lubricity and coefficient of static friction
    • products-show.asp?id=263&clickid=test_menu_2_26
    • CanNeed-PEBT-4000S
    • CanNeed-PEBT-4000S
    • CanNeed-PEBT-4000 PET Bottle Pressure Tester is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three international commonly used testing methods. CanNeed-PEBT-4000 is able to test the pressure capabilities that under a set pressure or the burst test in order to check whether the PET bottle is qualified to meet the requirement of packaging industry.
    • products-show.asp?id=118&clickid=test_menu_2_26
    • CanNeed-PEBT-4000
    • CanNeed-PEBT-4000 PET Bottle Pressure Tester (Burst Tester)
    • products-show.asp?id=264&clickid=test_menu_2_26
    • CanNeed-AHWC-100
    • CanNeed-AHWC-100 Automatic Hot Wire Bottle Cutter offers an easy-to-use and cost-effective method for cutting containers for section weight analysis. It can cut PET bottle into several determined sections (The maximum is up to 5 sections). Then, the user can check whether each section accord with the corresponding weight standard. CanNeed-AHWC-100 can quickly cut PET bottle with hot wires. Clear profiles can be obtained without PET deformation. PET bottle samples can be 200-3000 ml.
    • products-show.asp?id=55&clickid=test_menu_2_26
    • CanNeed-HWC-100
    • CanNeed-HWC-100 Hot Wire Bottle Cutter
    • products-show.asp?id=92&clickid=test_menu_2_26
    • CanNeed-CCST-800
    • products-show.asp?id=91&clickid=test_menu_2_26
    • CanNeed-CCST-100
    • CanNeed-CCST-100 Crown Cap Secure Seal Tester
    • products-show.asp?id=89&clickid=test_menu_2_26
    • CanNeed-BLT-100
    • CanNeed-BLT-100 Tumbling Tester for Crown Closures
    • products-show.asp?id=22&clickid=test_menu_2_26
    • CanNeed-TPO-100
    • CanNeed-TPO-100 Automatic Beverage Total Package Oxygen Analyzer
    • products-show.asp?id=29&clickid=test_menu_2_26
    • CanNeed-DO-100
    • CanNeed-DO-100 Dissolved Oxygen Meter (on-line) is used to monitor O2 content in liquid and gas on line. Adopt high accuracy optical probe, which not only makes high accuracy test but also fast response. There is no need to change diaphragm and electrolyte that reduce a lot of maintaining and running costs.
    • products-show.asp?id=28&clickid=test_menu_2_26
    • CanNeed-PDO-100
    • products-show.asp?id=53&clickid=test_menu_2_26
    • CanNeed-BT-100
    • CanNeed-BT-100 Bottle Turner
    • products-show.asp?id=76&clickid=test_menu_2_26
    • CanNeed-ISD-3000
    • CanNeed-ISD-3000 Piercing and Sampling Device
    • products-show.asp?id=119&clickid=test_menu_2_26
    • CanNeed-ASST-100
    • CanNeed-ASST-100 Automatic Secure Seal Tester
    • CanNeed ASST-1000 Automatic Secure Seal Tester is used to test the seal integrity after packaging. By detecting gas leakage, it effectively controls the seal integrity after packaging. It is used to test PET bottles, glass bottles and cans, also can be used to test crown caps and caps of PET bottles.
    • products-show.asp?id=182&clickid=test_menu_2_26
    • CanNeed-DSST-100
    • CanNeed-DSST-100 Digital Secure Seal Tester
    • products-show.asp?id=117&clickid=test_menu_2_26
    • CanNeed-SST-300
    • CanNeed-SST-300 Secure Seal Tester
    • products-show.asp?id=137&clickid=test_menu_2_26
    • CanNeed-SST-3
    • CanNeed-SST-3 Secure Seal Tester
    • products-show.asp?id=135&clickid=test_menu_2_26
    • CanNeed-SST-2
    • products-show.asp?id=49&clickid=test_menu_2_26
    • CanNeed-PU-2000
    • CanNeed-PU-2000 Pasteurization Temperature Monitor (PU Monitor)
    • products-show.asp?id=237&clickid=test_menu_2_26
    • CanNeed-CAN-125B
    • CanNeed-CAN-125B Pasteurization Temperature Monitor (PU Monitor)
    • CanNeed-CAN-125B Pasteurization Temperature Monitor is used to measure the temperature in bottles or cans ,also water temperature during sterilizing process,caculate Pu value,and temperature curve can display on PC or print out with a printer.
    • products-show.asp?id=30&clickid=test_menu_2_26
    • CanNeed-DGM-200
    • CanNeed-DGM-200 Portable Digital Beverage CO2 Calculator
    • products-show.asp?id=75&clickid=test_menu_2_26
    • CanNeed-GMT-100
    • CanNeed-GMT-100 Beverage CO2 Meter / Gehaltemeter
    • products-show.asp?id=52&clickid=test_menu_2_26
    • CanNeed-AS-200d
    • CanNeed-AS-200d Digital AutoShaker Beverage CO2 Calculator
    • products-show.asp?id=51&clickid=test_menu_2_26
    • CanNeed-AS-100
    • CanNeed-AS-100 AutoShaker Beverage CO2 Calculator
    • products-show.asp?id=65&clickid=test_menu_2_26
    • CanNeed-BCC-200
    • CanNeed-BCC-200 Digital Beverage CO2 Calculator
    • products-show.asp?id=66&clickid=test_menu_2_26
    • CanNeed-BCC-7001
    • products-show.asp?id=54&clickid=test_menu_2_26
    • CanNeed-CAN-7001/7002
    • products-show.asp?id=67&clickid=test_menu_2_26
    • CanNeed-CAN-5001
    • CanNeed-CAN-5001, CanNeed-CAN-5002 CO2 Tester and Pressure Tester
    • products-show.asp?id=71&clickid=test_menu_2_26
    • CanNeed-IAM-30
    • CanNeed-IAM-30 Air Meter
    • products-show.asp?id=77&clickid=test_menu_2_26
    • CanNeed-L-100
    • CanNeed-L-100 CO2 Purity Tester
    • products-show.asp?id=132&clickid=test_menu_2_26
    • CanNeed-FST-200TPH
    • CanNeed-FST-200TPH Foam Stability Tester
    • CanNeed-FST-200TPH Foam Stability Tester is a national standard brewery foam tester. According to the standards of NIBEM institute, FST-200TPH Foam Stability Tester measures the foam collapse time over a distance of 30mm. This measuring method is objective and believable, since it can well avoid the effect of flow. Besides, the effect of temperature, atmospheric pressure and humidity can also be calibrated.
    • products-show.asp?id=74&clickid=test_menu_2_26
    • CanNeed-SDF-100
    • CanNeed-SDF-100 Sampling Device Filler
    • products-show.asp?id=83&clickid=test_menu_2_26
    • CanNeed-MBCT-100
    • products-show.asp?id=79&clickid=test_menu_2_26
    • CanNeed-ASS-100
    • CanNeed-ASS-100 Angle Swinging Shaker
    • products-show.asp?id=78&clickid=test_menu_2_26
    • CanNeed-MB-800
    • products-show.asp?id=83&clickid=test_menu_2_26
    • CanNeed-MBCT-100
    • products-show.asp?id=22&clickid=test_menu_2_26
    • CanNeed-TPO-100
    • CanNeed-TPO-100 Automatic Beverage Total Package Oxygen Analyzer
    • products-show.asp?id=28&clickid=test_menu_2_26
    • CanNeed-PDO-100
    • products-show.asp?id=29&clickid=test_menu_2_26
    • CanNeed-DO-100
    • CanNeed-DO-100 Dissolved Oxygen Meter (on-line) is used to monitor O2 content in liquid and gas on line. Adopt high accuracy optical probe, which not only makes high accuracy test but also fast response. There is no need to change diaphragm and electrolyte that reduce a lot of maintaining and running costs.
    • products-show.asp?id=49&clickid=test_menu_2_26
    • CanNeed-PU-2000
    • CanNeed-PU-2000 Pasteurization Temperature Monitor (PU Monitor)
    • products-show.asp?id=237&clickid=test_menu_2_26
    • CanNeed-CAN-125B
    • CanNeed-CAN-125B Pasteurization Temperature Monitor (PU Monitor)
    • CanNeed-CAN-125B Pasteurization Temperature Monitor is used to measure the temperature in bottles or cans ,also water temperature during sterilizing process,caculate Pu value,and temperature curve can display on PC or print out with a printer.
    • products-show.asp?id=119&clickid=test_menu_2_26
    • CanNeed-ASST-100
    • CanNeed-ASST-100 Automatic Secure Seal Tester
    • CanNeed ASST-1000 Automatic Secure Seal Tester is used to test the seal integrity after packaging. By detecting gas leakage, it effectively controls the seal integrity after packaging. It is used to test PET bottles, glass bottles and cans, also can be used to test crown caps and caps of PET bottles.
    • products-show.asp?id=137&clickid=test_menu_2_26
    • CanNeed-SST-3
    • CanNeed-SST-3 Secure Seal Tester
    • products-show.asp?id=136&clickid=test_menu_2_26
    • CanNeed-FHG-100
    • CanNeed-FHG-100 Fill Height Gauge
    • products-show.asp?id=256&clickid=test_menu_2_26
    • CANNEED-SCDG

 
粤ICP备09135399号 © 2019 CANNEED.COM All rights reserved.  
SMT点料机,SMD点料机,点料机-CanNeed嘉仪仪器公司是世界著名的制罐仪器和饮料仪器生产商，产品畅销全球。在香港、肇庆等地设有公司、工厂和办事处。研制了多个系列的仪器：制罐检验仪器，饮料检验仪器，啤酒检验仪器，玻璃瓶和瓶盖检验仪器。 CanNeed嘉仪，检测仪器与检验服务优秀的提供商，为全球范围制罐、饮料、啤酒、食品、包装领域客户提供最全面的仪器和最专业的服务。
Keywords: SMT点料机 SMD点料机 点料机