Canneed Instrument Ltd.|www.canneed.com 肇庆市嘉仪仪器有限公司,SMT点料机,SMD点料机,点料机,Canneed Instrument Ltd.
󰀥
Products List : 󰅞󰅟

    • products-show.asp?id=309&clickid=test_menu_1_9_93
    • CanNeed-AFMS+ABMS-2010
    • Automatic Front End and Back End Measure Systems
    • products-show.asp?id=310&clickid=test_menu_1_9_93
    • CanNeed-ACBT+AAXL-2000
    • Automatic Can Resistance Tester
    • CanNeed-AAXL-2000 is a full automatic can axial load measure system with unattended operation. It can measure the axial load of the 2-piece can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans. CanNeed-ACBT-1000 is a full automatic buckle tester for can bottom with unattended operation.It determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses with dome growth function.
    • products-show.asp?id=260&clickid=test_menu_1_9_93
    • CanNeed-AFMS-2000
    • Automatic Front End Measure System
    • CanNeed-AFMS-2000 is a full automatic front end measure system with unattended operation. It can measure the wall thickness of upper and middle parts of the can, bottom depth and height of the can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans. CanNeed-AFMS-2000 is equipped with auto sampling device which conveys the can to the test area automatically. Swinging mechanical hand pushes the can to the test station then three-jaw centering mechanism locates the can quickly. Swinging device rotates the can to a defined angle to get various testing point. Test result is saved in database and is sent to SPC system automatically.
    • products-show.asp?id=267&clickid=test_menu_1_9_93
    • CanNeed-ABMS-2000
    • Automatic Back End Measure System
    • The CanNeed ABMS-1000 Automatic Can Measure System For Back End is used to measure Flange Width, Can Height & Internal Can Mouth Diameter of 2-pc can by unattended operation. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans. The samples will be rotated automatically when measurement starts. The 3 pneumatic controlled sensors will measure the sample automatically. Up to 50 measuring points can be set in 1 circle. Measure results can be stored automatically by our software database, and transferred to SPC systems automatically. The instrument has been calibrated by standard gauge. And it’s apply to different can types and heights.
    • products-show.asp?id=258&clickid=test_menu_1_9_93
    • CanNeed-AAXL-2000
    • Automatic Axial Load Tester
    • CanNeed-AAXL-2000 is a full automatic can axial load measure system with unattended operation. It can measure the axial load of the 2-piece can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.
    • products-show.asp?id=266&clickid=test_menu_1_9_93
    • CanNeed-ACBT-1000
    • Automatic Buckle Tester Bottom for Can
    • CanNeed-ACBT-1000 is a full automatic buckle tester bottom for cans with unattended operation.It determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses with dome growth function. CanNeed-ACBT-1000 is a standard instrument for can-making industry which can respectively and efficiently finish auto online measurement.
    • products-show.asp?id=318&clickid=test_menu_1_9_93
    • CanNeed-FMS-2000
    • products-show.asp?id=268&clickid=test_menu_1_9_93
    • CanNeed-FMS-1000
    • Automatic Can Measure System For Front End
    • CanNeed-FMS-1000 is a full automatic front end measure system with unattended operation. It can measure the wall thickness of upper and middle parts of the can, bottom depth and height of the can. It is a standard instrument for can-making industry which can realize the constant, efficient and automatic inspection for cans.
    • products-show.asp?id=150&clickid=test_menu_1_9_93
    • CanNeed-BMS-1000
    • Automatic Can Measure System for Back End
    • CanNeed-BMS-1000 Automatic Can Measure System for Back End is used to measure Flange Width, Can Height & Internal Diameter of 2-pc can. It’s designed based on practical experience and applied to back end inspection. It can be adjusted rapidly and applicable for various can height.
    • products-show.asp?id=153&clickid=test_menu_1_9_93
    • CanNeed-CBT-400
    • Buckle Tester Bottom for Can
    • CanNeed-CBT-400 Buckle Tester Bottom for Cans determines the exact pressure at which the can bottom begins to buckle respectively the dome reverses.
    • products-show.asp?id=148&clickid=test_menu_1_9_93
    • CanNeed-AXL-4000
    • Axial Load Tester
    • CanNeed-AXL-4000 Axial Load Tester” measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display.
    • products-show.asp?id=265&clickid=test_menu_1_9_93
    • CanNeed-MDER-C2
    • Multi-station Digital Enamel Rater for Cans
    • CanNeed-MDER-C2 is used to measure the coverage, the compactness and the electric current value of the enamel coating inside the food and beverage cans. The contents will erode the metallic material and affect the quality and storage of products if the enamel coating inside the cans is not integrated. The machine adopted semi-automatic technology, more efficient and more effectively reducing the human errors. CanNeed-MDER-C2 is the standard of can making industry.
    • products-show.asp?id=154&clickid=test_menu_1_9_93
    • CanNeed-CCAT-100
    • Can Comprehensive Abrasion Tester
    • CanNeed-CCAT-100 will imitate the clashing of cans during transportation, wearing-resisting property can be evaluated by observing.
    • products-show.asp?id=173&clickid=test_menu_1_9_93
    • CanNeed-DER-400
    • Digital Enamel Rater
    • The CanNeed-DER-400 Digital Enamel Rater is able to detect the exposed metal position more easily compare to the former models. The reformative electronic design makes it more sensitive, reliable and accurate. The anticorrosion characteristic of the enhanced can body support is ensured its durability. The film coated buttons are more durable and with better corrosion resistance.
    • products-show.asp?id=104&clickid=test_menu_1_9_93
    • CanNeed-FMD-200S
    • Can Measure Desk for Front Stations
    • CanNeed-FMD-200S Can Measure Desk for Front Stations is developed on basis of the long experience of Front Stations in 2 -piece can product line. It is applied at the inspection points of 2 -piece can product line. CanNeed-FMD-200S measures the Wall Thickness, Bottom Depth, Can Height. Please indicate the can type when ordering.
    • products-show.asp?id=103&clickid=test_menu_1_9_93
    • CanNeed-CMD-200S
    • Can Measure Desk for Rear Stations
    • CanNeed-CMD-200S Can Measure Desk for Rear Stations is developed on basis of the long experience of Rear stations in 2 –pc can product line. CanNeed-CMD-200S measures the Flange width, can height, inner Diameter. Please indicate the can type when ordering.
    • products-show.asp?id=40&clickid=test_menu_1_9_93
    • CanNeed-SM-24
    • CanNeed-SM-24 Electric Belt Drive Seamer
    • “CanNeed-SM-24 Electric Belt Drive Seamer” (Desktop model) enables the users to do more lab tests. Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring. It is much more convenient for those lab tests, fast, easy and high efficiency
    • products-show.asp?id=155&clickid=test_menu_1_9_93
    • CanNeed-CEBT-200
    • Buckle Tester for Can and End
    • Testing method: place the seamed 3 piece cans into the CanNeed-CEBT-100 testing base frame, then start the testing. For alternative, to seam the Ends onto a 2 piece can by the SM-24 Belt Drive Electric Seamer (a Canneed desktop seamer for laboratory), then cut off the bottom of that 2 piece can and place it into the CanNeed-CEBT-100 for testing.
    • products-show.asp?id=152&clickid=test_menu_1_9_93
    • CanNeed-PNR-C100
    • CanNeed-PNR-C100 Pressure No Return Tester for Cans on Bottom
    • CanNeed-PNR-C100 Pressure No Return Tester for Cans on Bottom can measure the PNR value (Plastic Deformation) and the buckle value of the can bottom. During the whole pressurization process, use the micrometer to track and measure the deformation amount, generate the curve through the software and analyze the correlation between pressure and deformation amount of the can bottom.
    • products-show.asp?id=151&clickid=test_menu_1_9_93
    • CanNeed-CBBT-100
    • CanNeed-CBBT-100 Burst and Buckle Tester for Can
    • The “Canneed-CBBT-100 Burst and Buckle Tester Bottom for Cans” determines the buckle pressure and the burst pressure of the 2 pc can.
    • products-show.asp?id=97&clickid=test_menu_1_9_93
    • CanNeed-IDG-100
    • CanNeed-IDG-100/200/300 Can Internal Diameter Gauge
    • The “CanNeed-IDG-100 Internal Diameter of Can” is used to measure the internal diameter of small cans, such as 200, 202, 206, 209. The “CanNeed-IDG-200 Internal Diameter of Can” is used to measure the internal diameter of larger cans. According to clients’ request,
    • products-show.asp?id=129&clickid=test_menu_1_9_93
    • CanNeed-FWG-100-d
    • CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge (digital)
    • The “CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge” is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
    • products-show.asp?id=110&clickid=test_menu_1_9_93
    • CanNeed-CHG-200
    • CanNeed-CHG-200 Digital Can Height Gauge
    • CanNeed-CHG-200 Digital Can Height Gauge can quick measure the heights of cans, applicable for 2-pc cans, 3-pc cans and aerosol cans. If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
    • products-show.asp?id=131&clickid=test_menu_1_9_93
    • CanNeed-WTG-200
    • CanNeed-WTG-200 Wall Thickness Gauge
    • The “CanNeed-WTG-200 Wall Thickness Gauge” measures the Topwall and Midwall Thickness for Trimmed 2-Piece Cans. Available for any
    • products-show.asp?id=126&clickid=test_menu_1_9_93
    • CanNeed-BDG-100
    • Bottom Depth Gauge
    • CanNeed-BDG-100 Bottom Depth Gauge is a Digital gauges for measuring Bottom depth parameters of beverage cans. Please indicate the can diameter when ordering.
    • products-show.asp?id=58&clickid=test_menu_1_9_93
    • CanNeed-CSS-1000
    • CanNeed-CSS-1000 Anti-noise Seam Saw
    • “CanNeed -CSS-1000 Anti-noise Seam Saw” is provided with an anti-noise design and a special guide for 2-and 3-piece cans with 65mm dia, such as beer cans and 209 cans. The cutting process is so precise, quick, safe and convenient to ensure precise cutting effects without distorting the cans. The seam image on Canneed series Seam Sight TM automatic seam measuring systems gets thereby every clear and improves measurement speed and reliability.
    • products-show.asp?id=43&clickid=test_menu_1_9_93
    • SeamSight-B
    • SeamSight-B Full Automatic Seam Monitor
    • SeamSight® Full Automatic Seam Monitor has adopted the advanced optical system and GoldenLens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The SeamSight® system is equipped with the new seam measuring software SeamSight® Professional Software. Which will do the line positioning automatically and the measurement to be finished within 1 second!
    • products-show.asp?id=251&clickid=test_menu_1_9_93
    • CanNeed-SFAT-100
    • Applicable to: glass bottles, plastic bottles, aluminum bottles and cans, etc. Enables accurate measurement of container lubricity and coefficient of static friction
    • products-show.asp?id=106&clickid=test_menu_1_9_93
    • CanNeed-CSRT-100
    • CanNeed-CSRT-100 Coating Scratch Resistance Tester
    • Under defined conditions, CanNeed-CSRT-100 Coating Scratch Resistance Tester is used to determine the resistance of a single coating or a multi-coating of paint, varnish or related product to penetration by scratching with a hemispherical tipped needle or abrasion tool and metal scratching tool and so on.
    • products-show.asp?id=107&clickid=test_menu_1_9_93
    • CanNeed-CTG-310
    • Coating Thickness Gauge
    • CanNeed-CTG-310 Coating Thickness Gauge is used to test the coating thickness(coating weight per unit area, g/m2). When equipped with “Hover Probe”, it can measure the coating thickness of plate sheets. When equipped with can body testing clamp, it can test the coating thickness of can body.
    • products-show.asp?id=290&clickid=test_menu_1_9_93
    • CanNeed-CMT-300
    • Mobility/Lubricity Tester for Cans (Digital)
    • CanNeed-CMT-300 Mobility / Lubricity Tester for Cans is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks. Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
    • products-show.asp?id=181&clickid=test_menu_1_9_93
    • CanNeed-TRK-6000S
    • CanNeed-TRK-6000 Oven Temperature Tracker
    • The “CanNeed-TRK-6000 Oven Temperature Tracker” is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.
    • products-show.asp?id=149&clickid=test_menu_1_9_93
    • CanNeed-AXL-CAL
    • CanNeed-AXL-CAL-4000 Calibration Cell For Axial Load Tester
    • CanNeed-AXL-CAL-10000 is used to calibrate the CanNeed-AXL-10000 Axial Load Tester. Place the CanNeed-AXL-CAL-10000 into the testing platform and rise up gradually until reaches the top plate, then the CanNeed-AXL-CAL-10000 will display the real time pressure, compare the value that displaying on the CanNeed- AXL-10000 to make the calibration.
    • products-show.asp?id=50&clickid=test_menu_1_9_93
    • CanNeed-CND-TRK-300
    • CanNeed-TRK-300 Oven Temperature Tracker
    • The “CanNeed-TRK-300 Oven Temperature Tracker” is a professional oven temperature curve inspection system for the coating industry, it is including the data logger, heat insulation case, software (Chinese / English) and thermocouples.
    • products-show.asp?id=242&clickid=test_menu_1_9_93
    • CanNeed-CBT-CAL
    • CanNeed-CBT-CAL is used to calibrate CanNeed-CBT-100/200/300, CanNeed-CBBT-100, CanNeed-CEBT-100, CanNeed-EBT-200/300
    • products-show.asp?id=273&clickid=test_menu_1_9_93
    • CanNeed-BPG-100
    • Bottle Profile Gauge
    • CanNeed-BPG-100 adopts optical and non-contact method, and precisely measures the parameters of the bottle mouth and closures to meet the requirement of the production and improve the quality, and to provide accurate data for customer. It can also inspect the wear condition of the mould to decide when to change.

 
粤ICP备09135399号 © 2019 CANNEED.COM All rights reserved.  
SMT点料机,SMD点料机,点料机-CanNeed嘉仪仪器公司是世界著名的制罐仪器和饮料仪器生产商,产品畅销全球。在香港、肇庆等地设有公司、工厂和办事处。研制了多个系列的仪器:制罐检验仪器,饮料检验仪器,啤酒检验仪器,玻璃瓶和瓶盖检验仪器。 CanNeed嘉仪,检测仪器与检验服务优秀的提供商,为全球范围制罐、饮料、啤酒、食品、包装领域客户提供最全面的仪器和最专业的服务。
Keywords: SMT点料机 SMD点料机 点料机