Canneed Instrument Ltd.|www.canneed.com 肇庆市嘉仪仪器有限公司,SMT点料机,SMD点料机,点料机,Canneed Instrument Ltd.
󰀥
Products List : 󰅞󰅟

    • products-show.asp?id=238&clickid=test_menu_1_9_92〈=cn
    • CanNeed-AXL-10000
    • Axial Load Tester
    • The “CanNeed-AXL-10000 Axial Load Tester” measures the axial force resistance of food cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
    • products-show.asp?id=157&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CLT-100
    • CanNeed-CLT-100 Leak Tester for can
    • CanNeed-CLT-100 Leak Tester for can is used for checking the leakage of 3-pc cans in a water bath. It can test one can in each test.
    • products-show.asp?id=325&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CLT-300
    • products-show.asp?id=158&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CLT-600
    • CanNeed-CLT-600 Leak Tester for can
    • CanNeed-CLT-600 Leak Tester for can is used for checking the leakage of 3-pc cans in a water bath. It can test six cans in each test.
    • products-show.asp?id=138&clickid=test_menu_1_9_92〈=cn
    • CanNeed-DHG-300
    • CanNeed-DHG-300 Digital Can Height Gauge
    • The “CanNeed-DHG-300 Digital Can Height Gauge” can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
    • products-show.asp?id=187&clickid=test_menu_1_9_92〈=cn
    • CanNeed-DHG-500
    • Digital Can Height Gauge
    • products-show.asp?id=323&clickid=test_menu_1_9_92〈=cn
    • CanNeed-COG-100
    • products-show.asp?id=129&clickid=test_menu_1_9_92〈=cn
    • CanNeed-FWG-100-d
    • CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge (digital)
    • The “CanNeed-FWG-100-d, CanNeed-FWG-200-d, CanNeed-FWG-300-d Flange Width Gauge” is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
    • products-show.asp?id=97&clickid=test_menu_1_9_92〈=cn
    • CanNeed-IDG-100
    • CanNeed-IDG-100/200/300 Can Internal Diameter Gauge
    • The “CanNeed-IDG-100 Internal Diameter of Can” is used to measure the internal diameter of small cans, such as 200, 202, 206, 209. The “CanNeed-IDG-200 Internal Diameter of Can” is used to measure the internal diameter of larger cans. According to clients’ request,
    • products-show.asp?id=156&clickid=test_menu_1_9_92〈=cn
    • CanNeed-BDD-200A
    • Bead Depth Gauge
    • CanNeed-BDD-200A Bead Depth Gauge is for measuring the bead depth of the can body, with the special designed end measuring holder, end bead depth can also be measured. The fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy.
    • products-show.asp?id=94&clickid=test_menu_1_9_92〈=cn
    • CanNeed-PDG-d
    • Plane Depth Gauge for Canned Food and Beverage
    • CanNeed-PDG-d Plane Depth Gauge for Canned Food and Beverage is used to measure the plane depth of canned food and beverage. It can monitor the inner pressure or vacuum of the cans without piercing the cans.
    • products-show.asp?id=64&clickid=test_menu_1_9_92〈=cn
    • CanNeed-WOM-4C
    • Welding Overlap Monitor
    • The CanNeed-WOM-4C Welding Overlap Monitor is used to measure the length and thickness of side seam welding overlap. It’s equipped with the most advanced optical system and Golden LensTM, which ensured the high image definition.
    • products-show.asp?id=161&clickid=test_menu_1_9_92〈=cn
    • CanNeed-WWP-100
    • CanNeed-WWP-100 Welding Seam Ball Press Tester
    • The “CanNeed-WWP-100 Welding Seam Ball Press Tester” is used to test the welding seam quality, including the welding seam strength and continuity of 3-piece cans.
    • products-show.asp?id=162&clickid=test_menu_1_9_92〈=cn
    • CanNeed-WWT-100
    • CanNeed-WWT-100 Welding Line Outstretched Tester
    • The “CanNeed-WWT-100 Welding line outstretched tester” is used to test the flange point welding integrality of 3-pieces cans. How to test: Place a sample can body on the corresponding plug, handle piston valve. And the cylinder drives the board to press the can body. Stop when the flange os curled about 10 mm. Then loosen the piston valve, take the can body out to check if there is any breaches. Mark down the result.
    • products-show.asp?id=165&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ZM-10
    • CanNeed-ZM-10 Portable Digital Body Blank Gauge
    • The “CanNeed ZM-10 Digital Body Blank Gauge” is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement. It’s particularly suitable for the production line inspection after the adjustment. Adopting aluminum alloy material so that it is quite light and convenient.
    • products-show.asp?id=163&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ZM-370-D
    • CanNeed-ZM-370-D, CanNeed-ZM-570-D, CanNeed-ZM-920-D, CanNeed-ZM-1220-D Digital Body Blank Gauge
    • products-show.asp?id=317&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ZM-1800-D
    • Digital Body Blank Gauge
    • CanNeed-ZM-1800-D Digital Body Blank Gauge is made to measure the length, width and perpendicularity (angle) and the diagonal on the blank sheets.
    • products-show.asp?id=40&clickid=test_menu_1_9_92〈=cn
    • CanNeed-SM-24
    • Electric Belt Drive Seamer
    • “CanNeed-SM-24 Electric Belt Drive Seamer” (Desktop model) enables the users to do more lab tests. Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring. It is much more convenient for those lab tests, fast, easy and high efficiency
    • products-show.asp?id=32&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CDS-10
    • Can Dissect Saw
    • CanNeed-CDS-100 Can Dissect Saw was specially designed to cut the can body into two axially, so that to observe the situation of corrosion or lacquer scale off.
    • products-show.asp?id=254&clickid=test_menu_1_9_92〈=cn
    • CanNeed-DST-100
    • Seal Tester for Steel Drum
    • CanNeed-DST-100 Seal Tester for Steel Drum is developed to use compressed air in the steel drum (for example paint drum) to test the inner pressure resistance. It has the advantages of simple structure, convenient use, is the steel drum manufacturers/users, as well as inspection institutions’ preferred testing equipment.
    • products-show.asp?id=170&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ALT-100
    • Leak Tester for Aerosol can
    • CanNeed-ALT-100 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans in a water bath. The can is freely suspended and submerged into the water. At the same time it is subjected to pressure and leaks are revealed by air bubbles. Test pressure 8 - 10 bar. The test procedure is performed semi-automatically. The tester is suitable for all aerosol can diameters. The maximum can height is 300 mm.
    • products-show.asp?id=171&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ALT-800
    • Leak Tester for Aerosol can
    • Canneed-ALT-600/ALT-800 Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans. ALT-600 can test 6 cans at the same time, and ALT-800 can test 8. The permeability tester for aerosol cans blows up the cans up to a maximum of 10 bar and submerges them under water. At the leaking spots of the can then visible air-bubbles escape.
    • products-show.asp?id=166&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ABT-100
    • Burst Buckling Tester for Aerosol Cans
    • The “CanNeed-ABT-100 Burst Buckling Tester for Aerosol Cans “ is used to determine the buckle value of bottom (dome) and Top end of aerosol cans and the pressure at which the can bursts. With the special designed clamp, it is able to measure the dome or bottom free ends independently. At high pressures from approximately 22 - 28 bar, it may happen that deformations of the valve and a higher burst pressure.
    • products-show.asp?id=167&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ABT-200
    • Burst Buckling Tester for aerosol cans
    • “CanNeed-ABT-200 Burst Buckling Tester for Aerosol Cans” is used for testing the buckle value of bottom and end (dome) of aerosol cans and the pressure at which the can bursts. The CanNeed-ABT-200 was PLC controlled, and equip with the special designed clamp device, CanNeed-ABT-200 is able to test the buckle value of free ends (dome) or bottom of aerosol cans independently.
    • products-show.asp?id=221&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ACH-100
    • Aerosol Curl Height Gauge
    • CaNneed-ACH-100 Aerosol Curl Height Gauge is used for measuring the contact height of the curl 1” aperture of aerosol cans. ACH-100 is the Industry Standard.
    • products-show.asp?id=124&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ACH-200
    • Aerosol Curl Height Gauge
    • products-show.asp?id=169&clickid=test_menu_1_9_92〈=cn
    • CanNeed-AFMD-200
    • Aerosol Can Measure Desk For Front End
    • AFMD-200 Aerosol Can Measure Desk for Back End is used in aerosol can product line. Measures bottom &wall thickness, can body diameter, can height. Pls state can type when place an order
    • products-show.asp?id=168&clickid=test_menu_1_9_92〈=cn
    • CanNeed-ACMD-200
    • Aerosol Can Measure Desk For Back End
    • CanNeed ACMD-200 Aerosol Can Measure Desk for Back End is used to the production line of aerosol cans. Measures bottom & wall thickness, bottom depth, can height, external & internal diameter. Please specify the can types when ordering.
    • products-show.asp?id=326&clickid=test_menu_1_9_92〈=cn
    • CanNeed-AMG-300
    • products-show.asp?id=35&clickid=test_menu_1_9_92〈=cn
    • CanNeed-DSB-100
    • Dissect Saw for Bottle Can
    • products-show.asp?id=255&clickid=test_menu_1_9_92〈=cn
    • CanNeed-TDE-100
    • Sterilization Thermograph (Can FO Value Tester)
    • Suitable for all kinds of sterilization apparatus and occasions for recording temperature: retorts, spray sterilizing machines, sink type sterilizer, warehouse and trucks. Suitable for a variety of products: cans, beverage, beer, packaged food and jellies. Suitable for different packages: big and small metal cans, PET bottles, glass bottles, bags and plastic boxes.
    • products-show.asp?id=312&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CVG-100
    • Canners Vacuum Gauge
    • The CanNeed CVG-100 and CVG-200 Canner’s Vacuum Gauge” is used for measuring the vacuum pressure of seamed cans. And the “CVG-200-PET Beverage Vacuum Gauge” is for measuring the vacuum pressure of beverage. The gauge is placed on top of the can or bottle and the piercing needle is forced through the top of the can or bottle. The rubber collar forms a temporary seal to allow for measurement.
    • products-show.asp?id=73&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CVG-200
    • CanNeed-CVG-100, CanNeed-CVG-200 Canners Vacuum Gauge
    • products-show.asp?id=72&clickid=test_menu_1_9_92〈=cn
    • CanNeed-CPG-200
    • CanNeed-CPG-200 Canners Pressure Gauge
    • products-show.asp?id=294&clickid=test_menu_1_9_92〈=cn
    • SCO
    • Sanitary Can Opener
    • A unique opener used to remove the centre section of the can end while keeping the double seam intact. Sample can diameter: 40-300 mm 3-piece cans
    • products-show.asp?id=152&clickid=test_menu_1_9_92〈=cn
    • CanNeed-PNR-C100
    • CanNeed-PNR-C100 Pressure No Return Tester for Cans on Bottom
    • CanNeed-PNR-C100 Pressure No Return Tester for Cans on Bottom can measure the PNR value (Plastic Deformation) and the buckle value of the can bottom. During the whole pressurization process, use the micrometer to track and measure the deformation amount, generate the curve through the software and analyze the correlation between pressure and deformation amount of the can bottom.

 
粤ICP备09135399号 © 2019 CANNEED.COM All rights reserved.  
SMT点料机,SMD点料机,点料机-CanNeed嘉仪仪器公司是世界著名的制罐仪器和饮料仪器生产商,产品畅销全球。在香港、肇庆等地设有公司、工厂和办事处。研制了多个系列的仪器:制罐检验仪器,饮料检验仪器,啤酒检验仪器,玻璃瓶和瓶盖检验仪器。 CanNeed嘉仪,检测仪器与检验服务优秀的提供商,为全球范围制罐、饮料、啤酒、食品、包装领域客户提供最全面的仪器和最专业的服务。
Keywords: SMT点料机 SMD点料机 点料机