Canneed Instrument Ltd.|www.canneed.com 肇庆市嘉仪仪器有限公司,SMT点料机,SMD点料机,点料机,Canneed Instrument Ltd.
󰀥
Products List : 󰅞󰅟

    • products-show.asp?id=145&clickid=test_menu_1_9_91〈=ru
    • CanNeed-LaserScore-300
    • CanNeed-LaserScore-300 Automatic EOE Score Residue and Progression Measure System (Non-contact)
    • Based on laser technology and automatic visual positioning technology, the CanNeed “LaserScore-300 Automatic EOE Score Residue and Progression Measure System” is used to inspect EOE score residue and rivet convex progression automatically. LaserScore-300 has 2 work positions, each position adapts to inspect 202, 206 and 209 EOE.
    • products-show.asp?id=144&clickid=test_menu_1_9_91〈=ru
    • CanNeed-LaserScore-200
    • CanNeed-LaserScore-200 Score Residue Measure System
    • products-show.asp?id=147&clickid=test_menu_1_9_91〈=ru
    • CanNeed-SMM-400
    • Score Measure Microscope
    • CanNeed-SMM-400 Score Measure Microscope adopted the microscope technology to measure the score depth and residue of can ends. Equip with the high definition CCD camera system, locating done by displaying the clear groove bottom image of the end score on the screen, the measurement data is accurate, reliable and reproducible. The end sample to be clamped on a two-dimensional platen, which is much easier for locating and measurement. The fine digital indicator which has a resolution of 1µm (0.001mm).
    • products-show.asp?id=228&clickid=test_menu_1_9_91〈=ru
    • CanNeed-AEPS-100
    • Automatic End Profile Systems
    • CanNeed-AEPS-100 Automatic End Profile Systems is used to test end sizes. Excellent performance, adopt optical testing technology, accurately measures end sizes.
    • products-show.asp?id=38&clickid=test_menu_1_9_91〈=ru
    • CanNeed-EPS-100
    • End Profile System
    • CanNeed-EPS-100 End Profile System is used to measure the end dimensions. It is with excellent performance by adopting precise optics measuring technology, measuring the end dimensions precisely.
    • products-show.asp?id=143&clickid=test_menu_1_9_91〈=ru
    • CanNeed-EMS-200
    • CanNeed-EMS-200 Multiple Lid Measurement Station
    • CanNeed-EMS-200 Multiple Lid Measurement Station is for measuring the End Curl Outer Diameter, End Curl Height, Countersink and Thimble Depth. The end countersink is the height of countersink position minus the thickness of plate.
    • products-show.asp?id=109&clickid=test_menu_1_9_91〈=ru
    • CanNeed-EMD-400
    • End Measure Desk
    • CanNeed-EMD-400 End Measure Desk is developed according to the long-term practical experience, it can be used next to the production line or in the laboratory. The CanNeed-EMD-400 measures the End Curl Height, End Curl Diameter, End Curl Width and Countersink.
    • products-show.asp?id=112&clickid=test_menu_1_9_91〈=ru
    • CanNeed-CSG-200S
    • Countersink Gauge (with data output button)
    • The “CanNeed-CSG-200 Countersink Gauge (digital)” is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can). With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauge can be connected to a computer or SPC system via the adapter and cable, so that to avoid the manual recording and personal error. The gauge can also combine with Canneed Seam Monitors and import the measurement data into computer.
    • products-show.asp?id=90&clickid=test_menu_1_9_91〈=ru
    • CanNeed-CDG-100
    • CanNeed-CDG-100 Curl Diameter Gauge
    • CanNeed-CDG-100 Curl Diameter Gauge is a Digital gauge for measuring curl diameter of ends. It is applicable for different round ends and square ends.
    • products-show.asp?id=101&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ECW-d
    • products-show.asp?id=100&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ECH-d
    • CanNeed-ECH-d End Curl Height Gauge
    • The “CanNeed -ECH-d End Curl Height Gauge” is a digital gauge for measuring the curl height of ends, applicable for both round ends and square ends. With the Mitutoyo 0.01mm resolution digital indicator. If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
    • products-show.asp?id=195&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ECEW-100
    • products-show.asp?id=156&clickid=test_menu_1_9_91〈=ru
    • CanNeed-BDD-200A
    • Bead Depth Gauge
    • CanNeed-BDD-200A Bead Depth Gauge is for measuring the bead depth of the can body, with the special designed end measuring holder, end bead depth can also be measured. The fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy.
    • products-show.asp?id=141&clickid=test_menu_1_9_91〈=ru
    • CanNeed-PTG-100
    • CanNeed-PTG -100 Digital Plate Thickness Gauge
    • products-show.asp?id=259&clickid=test_menu_1_9_91〈=ru
    • CanNeed-AEBT-1000
    • Automatic Buckle Tester for Loose ends
    • CanNeed-AEBT-1000 Buckle Tester for Loose ends is for testing the exact pressure at which the end buckles. Any end of varying diameter can be tested: change parts are available that can be exchanged within seconds. Three testing modes: “Buckle Test”, “Missile Test”, and “Score Burst Test”. If configured with special clamp, it can make score line cracking test for an end. Suitable for ends of various sizes. User should choose the clamp accordingly.
    • products-show.asp?id=139&clickid=test_menu_1_9_91〈=ru
    • CanNeed-EBT-400
    • CanNeed-EBT-300 Buckle Tester for Loose Ends (With Missile Test)
    • The “CanNeed-EBT-300 Buckle Tester for Loose ends” is for testing the exact pressure at which the end buckles. Any end of varying diameter may be tested: change parts are available that can be exchanged within seconds. Three testing modes: “Buckle Test”, "Missile Test”, and “Score Burst Test”.
    • products-show.asp?id=155&clickid=test_menu_1_9_91〈=ru
    • CanNeed-CEBT-200
    • Buckle Tester for Can and End
    • Testing method: place the seamed 3 piece cans into the CanNeed-CEBT-100 testing base frame, then start the testing. For alternative, to seam the Ends onto a 2 piece can by the SM-24 Belt Drive Electric Seamer (a Canneed desktop seamer for laboratory), then cut off the bottom of that 2 piece can and place it into the CanNeed-CEBT-100 for testing.
    • products-show.asp?id=142&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ELT-100
    • CanNeed-ELT-100 Leak Tester for End
    • The “CanNeed-ELT 100 Leak Tester for End” is used to determine the pressure at which ends buckle. This tester is also used to test for pin hole leaks in the tab score and rivet area.
    • products-show.asp?id=134&clickid=test_menu_1_9_91〈=ru
    • CanNeed-PNR-E200
    • CanNeed-PNR-E200 Pressure No Return Tester for Ends
    • The CanNeed-PNR-E200 Pressure No Return Tester for Ends can measure the PNR value (Plastic Deformation) and the buckle value of the ends. During the whole pressurization process, use the micrometer to track and measure the deformation amount, generate the curve through the software and analyze the correlation between pressure and deformation amount of the ends.
    • products-show.asp?id=231&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ADER-E1000
    • Automatic Digital Enamel Rater for Ends
    • CanNeed-ADER-E1000 is used to test the coverage of the enamel coating inside ends.(enamel coating compactness, mA)
    • products-show.asp?id=185&clickid=test_menu_1_9_91〈=ru
    • CanNeed-MDER-10
    • Multi-station Digital Enamel Rater for Ends
    • CanNeed-MDER-10 Multi-station Digital Enamel Rater For Ends is used to test the integrity of the inner coating (inner coating density and current value) of the 10 ends at one time. If the inner coating is incomplete and the contents will corrode the metal and affect the quality and storage of the product.
    • products-show.asp?id=41&clickid=test_menu_1_9_91〈=ru
    • CanNeed-VRM-4C
    • CanNeed-VRM- 4C Video Rivet monitor
    • The “Canneed-VRM-4C Video Rivet monitor“ is a Video camera system to observe and evaluate the rivet profile images of ends for rivet quality control. Any end of varying diameter may be tested.
    • products-show.asp?id=59&clickid=test_menu_1_9_91〈=ru
    • CanNeed-LSS-100
    • Low Speed Saw
    • CanNeed-LSS-100 Low Speed Saw" is for cutting the End rivet to observe and evaluate the rivet profile images of ends.
    • products-show.asp?id=146&clickid=test_menu_1_9_91〈=ru
    • CanNeed-PTT-400
    • Pop & Tear Tester
    • CanNeed PTT-400 Pop & Tear Tester was developed for testing different kinds of easy open ends. It can measure the Pop & Tear force, ring rotary force and ring detaching force.
    • products-show.asp?id=234&clickid=test_menu_1_9_91〈=ru
    • CanNeed-PTT-300
    • Pop & Tear Tester
    • The “CanNeed-PTT-300 Pop & Tear Tester” was developed for testing different kinds of easy open ends.
    • products-show.asp?id=249&clickid=test_menu_1_9_91〈=ru
    • CanNeed-PTT-200S
    • CanNeed-PTT-200S Pop & Tear Tester
    • products-show.asp?id=99&clickid=test_menu_1_9_91〈=ru
    • CanNeed-HDM-100
    • Height Dimension Measure Desk for Claw Twist Cap
    • CanNeed-HDM-100 Height Dimension Measure Desk for Claw Twist Cap is developed based on long-term practical experience. It is applied to measure the height dimensions of the claw twist cap: cover, claws, glue thickness, groove depth and projecting ear.
    • products-show.asp?id=98&clickid=test_menu_1_9_91〈=ru
    • CanNeed-RDM-100
    • CanNeed-RDM-100 Radial Dimensions Measure Desk For Claw Twist Cap
    • products-show.asp?id=164&clickid=test_menu_1_9_91〈=ru
    • CanNeed-ZME-1220
    • CanNeed-ZME-1220 Digital End Blank Gauge for Scroll Cut

 
粤ICP备09135399号 © 2019 CANNEED.COM All rights reserved.  
SMT点料机,SMD点料机,点料机-CanNeed嘉仪仪器公司是世界著名的制罐仪器和饮料仪器生产商,产品畅销全球。在香港、肇庆等地设有公司、工厂和办事处。研制了多个系列的仪器:制罐检验仪器,饮料检验仪器,啤酒检验仪器,玻璃瓶和瓶盖检验仪器。 CanNeed嘉仪,检测仪器与检验服务优秀的提供商,为全球范围制罐、饮料、啤酒、食品、包装领域客户提供最全面的仪器和最专业的服务。
Keywords: SMT点料机 SMD点料机 点料机