EMS-100 Multiple Lid Measurement Station is for testing the End outer diameter, End hook height and Countersink.
Place the ends on the testing platform, select the measure points, then press  start. The three pneumatic controlled sensors will start to measure the sample ends automatically at the same time. The sample ends will be rolled automatically to change the measure points. For every circle, the amount of measure points can be set from 1 to 50.
Measurement results can be exported by the RS232 data wire. Calibrate by the standard gauge and controlled by the touch-screen PLC system.
Use the CND_EMS 1.0 professional software to collect and save the measurement data into the database, helps on the statistics and generating reports.

Canneed "LaserScore-100 Score Residue Measure System" 
Non-contact and Non-Destructive Score Residual Measurement. 
Based on laser technology and software analysis, 
LaserScore-100 score residue measure system is CanNeed's 
non-destructive system for measuring the residual score on Ends. 
The system is available as a semi-automated product
 (the operator merely inserts the ends). 
The LaserScore-100 system combines ease of use and reliability 
with excellent repeatability and accuracy. 

Canneed ¡°SMM-200 Score Measure Microscope¡± has been used in daily production control since
many years worldwide, and it has shown many advantages in companrison with other methods. The
sample end is put on a two dimensional platen, supported by measuring needle.The high definition
CCD camera system is used to take clear pictures of the groove bottom, which showed on the display.
The score residual and score depth and plate thickness can be measured.
SMM-200 Score Measure Microscope has a free working distance of about 8mm at the actual magnification of 50 X,The measuring repeatability is within  +/-0.002mm .

VSM 6A Automatic Seam Monitor, Automatic seam measurements
for cans Within seam image archive software the computer
offers a measurement. The seam length, body hook, end hook,
actual overlap, percentage overlap, seam gap, seam thickness
and body hook butting% are measured.

CMD-200 Can Measure Desk For Rear Stations is developed on basis of the long experience of Rear stations in 2 piece can product line.

CMD-200 Measure Flange width, Bottom depth, can height, Internal Diameter.

FMD-200 Can Measure Desk For Front Stations is developed on basis of the long experience of Front Stations in 2 piece can product line.

FMD-200 Measure Topwall Thickness and Midwall Thickness, Bottom depth, can height, Internal Diameter. 

DER-3 Digital Enamel Rater  is the industry standard.  
The new CANNEED Enamel Rater DER-3 instrument test the coverage
 of the enamel coating inside food and beverage cans. 
Also aerosol-cans may be tested with DER-3 Digital Enamel Rater.  
It displays an index of the amount of metal exposed by 
incomplete enamel coverage on a clear, easily read digital LED.  

The Canneed's CTG-100 Coating Thickness Gauge provides
a computer enhanced method of rapidly assessing lacquer
film weight of both internal and external coatings on
beverage and food cans. 

The "canneed AXL-4000 Axial Load Tester" measures the axial force
 resistance of beverage cans in Newton. The can is placed in a support 
and gradually forced upwards against the pressure plate. 
The space between the support and the top plate can be altered with 
spacers. The can crashes after the peak force has been applied that 
the can is capable of resisting. The maximum value can now be read
 in the display. 

The automatic STR-100 Seam Stripper is a sensible, affordable, 
teardown method to prepare the double seam teardown analysis.
One fast, safe teardown operation without damaging or
 distorting the cover hook.
Reduce teardown time for more frequent inspections.  
Tooling quick change in few seconds. Available in size from 
200 to 603 and for beverage, food, and aerosol cans.
Efficient cut and strip both aluminium and steel cans in a single motion. 
10 seconds per can.
Eliminates the repetitious actions by hand .

VWM 2A Video Welding Line Monitor for Flange Width Fall is use for measuring the welding line deviation size of 3 piece cans.

Please the sample on the testing base, the CCD camera will quickly focus, then the welding line image will be display on the screen, use the VMM Measuring Software to measure the welding line deviation size, and save the image and measurement results, so that convenient for the communication on quality control.

the STG-200-d Seam thickness gauge can be used to measure Seam thickness. 
With measure angle compensation. The center mesure point can be adjusted.
Cans can be auto- positoned in the center easily during measuring . 
With the Mitutoyo 0.01mm Resolution Digital Indicator.  
If you purchase the adapter and cable, the instrument can communicate with a computer. 

the Canneed SLG-d Seam length gauge(digital)  can be used to measure Seam length (Seam height).
Can is positoned by standing up during measuring. 
With the Mitutoyo 0.01mm Resolution Digital Indicator.  
If you purchase the adapter and cable, 
the instrument can communicate with a computer.

The canneed "CLT-100 Leak Tester for can" is used for checking
the permeability of 3-piece cans in a water bath.
The can is fixed by magnet disc plate and submerged into the water.
At the same time it is subjected to pressure and leaks
are revealed by air bubbles. Test pressure 8 - 10 bar.
The test procedure is performed semi-automatically.
The tester is suitable for round 3-piece cans of max.
can diameter of 130 mm. The maximum can height is 300 mm.

The "Canneed CBT-100 Buckle Tester Bottom for Cans" determines  
the exact pressure at which the can bottom begins to buckle 
respectively the dome reverses. 
The empty flanged can or straight wall can is placed in the holder.  
After covering the device with a plexiglass hood pressure is applied.  
The can is sealed with a rubber o-ring structure. Fast pressure increase  
up to 5 bar (programmable to just bellow the expected buckle value),  
from there "speed of pressure increase" may be set within the device.  
The test is terminated as soon as the can buckles.  
The maximum pressure value is shown in the display. 
Any can of varying diameter and height may be tested: inserts are 
available that can be exchanged within seconds. 

The canneed"CLT-600 Leak Tester for can" is used for checking
the permeability of 3-piece cans in a water bath.
The can is fixed to magnet disc plate and submerged into the water.
At the same time it is subjected to pressure and leaks
are revealed by air bubbles. End and side seams visible.
A special parallel clamping system enables to measure
different diameters and heights with one device.
The clamping pressure and the test pressure may be set independantly.
The operator determines the period of time the cans are under water.
If he switches the by-pass lever and presses the two button valves,
the cans deaerate and are lifted out of the water.
The whole test cycle is automated and is pneumatically controlled
by pressure regulator valves.

CANNEED CSG-d Countersink Gauge is a Digital gauges for measuring Countersink depth parameters  
( the depth of beader of can). With the Mitutoyo 0.01mm Resolution Digital Indicator.  
The gauges may be connected to a computer via a multiplexer.  

The Canneed ACH-100 Aerosol Curl Height Gauge is used for measuring
the contact height of the curl 1" aperture of aerosol cans.
ACH-100 is the Industry Standard.

The gauge is first calibrated by setting the calibration ring on the gauge. In this case the dial has to indicate the value of 4.25 mm.
The measurement on the can is then inserting the gauge up to the shank into the can and then slowly releasing the button.

The "Canneed LSS-100 Low Speed Saw" is for cut the End rivet to observe and evaluate the rivet profile images of ends. It work with the "Canneed VRM 3A Video Rivet monitor¡±

The end is cut through the rivet by the LSS-100 Low Speed Saw, the rivet is positioned manually in front of the camera. The rivet profile images display on the display.

Use the "VRM Measuring Software" to measure the rivet quality. It is able to print the rivet profile images and data, convenient for the communication of quality control.