|
| |
Product Classification : Canned Food and Beverage
|
| Total page:2
Current page:1 Total records:41 |
First |
Previous |
Next |
Last
|
|
|
CSS-1000 Anti-noise Seam Saw
|
|
CanNeed ¡°CSS-1000 Anti-noise Seam Saw¡± is provided with an anti-noise design and a special guide
for 2-and 3-piece cans with 65mm dia, such as beer cans and 209 cans. The cutting process is so precise, quick, safe and convenient to ensure precise cutting effects without distorting the cans. The seam image on Canneed series Seam Sight TM automatic seam measuring systems gets thereby every clear and improves measurement speed and reliability.
|
|
|
CAN-1050D Digital Can Closing Force Gauge
|
|
The¡°CAN-1050D Can Closing Force Gauge¡± is for measuring the force of seaming head of the seaming machine. By using CAN-1050d, producers can avoid product defects caused by over plating: sharp edge, seam breakage, body deformation, body hook overlength, over large countersink and so on. In the meantime, producers can also avoid product defects caused by too small pallet lift force: slippery cans, too short hook and so on.
|
|
|
CND-SST-300 Secure Seal Tester(3 Stations)
|
|
The ¡°CND-SST-300 Secure Seal Tester ¡°is used to test seal integrity on the glass or plastic containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
|
|
|
DSST-100 Digital Secure Seal Tester
|
The ¡°Canneed DSST-100 Digital Secure Seal Tester ¡°is used to test seal integrity on the glass or plastic containers and cans. The DSST-100 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The DSST-100 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
|
|
|
VST-200 Vacumn And Seal Tester For Claw Twist Cap
|
VST-200 Vacumn And Seal Tester For Claw Twist Cap has the following two roles:
1. Measure the response of the Vacuum Safety Button on the twist cap to the stree. Vacuum to which pressure value, the safety button will inhale. And release to which pressure value, it will recover.
2. Measure the tightness and the pressure resistance.
|
|
|
RDM-100 Radial Dimensions Measure Desk For Claw Twist Cap
|
|
RDM-100 Radial Dimensions Measure Desk For Claw Twist Cap is developed based on the long-term practical experience. It is applied to measure the radial dimensions of claw twist cap: cover outer diameter, cover inside diameter, claw diameter, claw width.
|
|
|
HDM-100 Height Dimension Measure Desk For Claw Twist Cap
|
HDM-100 Height Dimension Measure Desk For Claw Twist Cap is developed based on long-term
pratical experience. It is applied to measure the height dimensions of the claw twist cap: cover, claws, glue thickness, groove depth and projecting ear.
|
|
|
Seam-X-line X-Ray Automatic Seam Scanner (Non-destructive)
|
Seam-X Automatic Seam Scanner adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc .It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
|
|
|
VSM 6A+ Automatic Seam Monitor
|
The VSM 6A+ Automatic Seam Monitor is a compact measuring system for quick and accurate
automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy.
The VSM 6A+ Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
|
|
|
Seam Sight(TM) Full Automatic Seam Monitor
|
The Seam SightTM Full Automatic Seam Monitor is a compact measuring system for quick and accurate automatic seam measurements and storing of seam images.
The seam is positioned manually in front of the camera and is digitised by the computer.
In less than 1 second the Seam SightTM software offers a measurement. The seam length, body hook, end hook, actual overlap, percentage overlap; seam gap, seam thickness and body hook butting% are measured. At the end of the measurement an evaluated seam appears including dimension lines and measured values. This may be stored in computer or printed out on a laserprinter. The values can be stored in a Excel file and are displayed in on-screen if values are within specs.
|
|
|
SCG-200 Seamer clearance Gauge
|
|
CanNeed SCG-200 Seamer clearance Gauge, a quick and accurate way to set up seamers.To measure the roll height off the chuck and the lateral distance between the roll and chuck.
|
|
|
RPG-100 Roll profile Gauge
|
|
The RPG-100 is able to scan profiles of seaming Rolls and Chucks (or other tooling - including carbide and ceramic tools) easily and quickly. The system can be used for acceptance testing for new seaming rolls or chucks, for quality assurance purposes and for stress analysis. Monitor tooling wear to replace rolls and chucks only when they need to be replaced
|
|
|
CAN-F-125 Pasteurization Temperature Monitor
|
CanNeed CAN-F-125 Sterilization Temperature Monitor (F0 Value Monitor) has been chosen by many beverage and canned food factories.
Applicable to different kinds of sterilization equipments and different place that require temperature monitoring: sterilization kettle (autoclave), Spray sterilization machine, Water sink sterilization machine, warehouse, transportation vehicles, etc.
Applicable to different kinds of products: canned food, beverage, beer, pouch food, jelly, etc.
Applicable to different kinds of packaging: metal cans, glass or PET bottles, pouches, plastic boxes, etc.
|
|
|
DER-4 Digital Enamel Rater
|
DER-4 Digital Enamel Rater is the industry standard. The new CanNeed Enamel Rater DER-4 instrument test the coverage of the enamel coating inside food and beverage cans, aerosol-cans and also different kinds of ends. It displays an index of the amount of metal exposed by incomplete enamel coverage on a clear, easily read digital LED.
|
|
|
CSS 2000 seam saw
|
CANNEED CSS 200 seam saw
is a special seam circular saw with double cut for can double seam inspections.
The CSS 200 was specially designed for 2- and 3-piece cans.
Also aerosol-cans may be sawed with this saw.
|
|
|
CSS-100B Anti-noise Seam Saw
|
|
CanNeed ¡°CSS-100B Anti-noise seam saw¡± is provided with an anti-noise design and a special guide for 2- and 3-piece cans (65 mm dia.). Special seam circular saw with double cut for can double seam inspections. The CSS 100B was specially designed for 2- and 3-piece cans. The nitrated blades achieve together with the speed of approx. 1.000 r/min. a very plain cut surface. The seam image on VSM 6A Automatic Seam Computer (Video Seam Monitors), and automatic seam measuring systems gets thereby very clear and improves measurement speed and reliability.
|
|
|
CVG-100 Canners Vacuum Gauge
|
the Canneed "CVG-100 and CVG-200 Canner's Vacuum Gauge",
Used to measure the vacuum pressure of seamed cans.
The gauge is placed on top of the can and the piercing needle
is forced through the top of the can.
The rubber collar forms a temporary seal to allow for measurement.
|
|
|
STR-100 Seam Stripper
|
|
The automatic "STR-100 Seam Stripper" is a sensible, affordable, teardown method to prepare the double seam teardown analysis. One fast, safe teardown operation without damaging or distorting the cover hook. Reduce teardown time for more frequent inspections. Tooling quick change in few seconds. Models are available for most common can sizes of beverage, food, and aerosol cans. When ordering, the end diameter and can height must be specified so that the appropriate change parts are included. Efficient cut and strip both aluminium and steel cans in a single motion. 10 seconds per can. Eliminates the repetitious actions by hand.
|
|
|
CVG-200 Canners Vacuum Gauge
|
|
the Canneed "CVG-100 and CVG-200 Canner's Vacuum Gauge", Used to measure the vacuum pressure of seamed cans.
The gauge is placed on top of the can and the piercing needle is forced through the top of the can.
The rubber collar forms a temporary seal to allow for measurement.
|
|
|
CSG-200 Countersink Gauge (digital)
|
|
The CanNeed ¡°CSG-200 Countersink Gauge (digital)¡± is a Digital gauge for measuring Countersink depth parameters (the depth of beader of can). With the Mitutoyo 0.01mm Resolution Digital Indicator. The gauge can be connected to a computer or SPC system via the adapter and cable, so that to avoid the manual recording and personal error. The gauge can also combine with Canneed Seam Monitors and import the measurement data into computer.
|
|
|
CSM-208, CSM-207 Can Seam Micrometers (Fine tuning)
|
CanNeed CSM series Can Seam Micrometers are use for measuring the seam thickness and length. The fine tuning function helps to avoid the deviation caused by over rotation.
CSM-208 is applicable to measure the seam thickness and length of flat bottom straight wall cans.
CSM-207 is applicable to measure the seam thickness and length of aerosol cans and necked-in cans.
|
|
|
CAN-10774 Planer and Shaper Pin Height Gauge
|
|
The Pin Height Gauge is commonly used in the initial setup of the seamer to ensure double seaming performance and air removal.
|
|
|
CAN-1050 Can Closing Force Gauge
|
"CAN-1050 Can Closing Force Gauge" is for measuring the force of seaming head of the seaming machine. Advantages:
1. Deduct the scrap rate of the production
2. Shorten the adjusting time, improved production efficiency.
3. Improved the seam quality
|
|
|
SCO Sanitary Can Opener
|
A unique opener used to remove the centre section of the can end while keeping the double seam intact.
Sample can diameter: 40-300 mm 3-piece cans
|
|
|
CST-100 Can Seal Tester (Vacuum mode)
|
|
The Canneed ¡°CST-100 Can Seal Tester (Vacuum mode)¡± is for testing the secure seal of the 3 piece cans by applying the vacuum pressure to see whether the cans leak. It can test 1 (one) round can at each test.
|
|
|
CLT-100 Leak Tester for can
|
The Canneed "CLT-100 Leak Tester for can" is used for checking the leakage of 3-piece cans in a water bath. It can test one can in each test. The test procedure is performed semi-automatically and the CLT-100 is suitable for different sizes of round 3-piece cans.
|
|
|
SST-2 Secure seal tester
|
|
The "canneed SST-2 Secure Seal Tester" is used to
test seal integrity on the glass or plastic containers and cans.
The SST-2 has been designed to address the special needs
of sealing cans and bottles that use aluminum roll-on,
twist crowns, or plastic caps.
The SST-2 operates with compressed air, nitrogen,
or carbon dioxide. By detecting gas leakage, rather than liquid,
the Secure Seal Tester gives more sensitive, accurate readings.
|
|
|
CAN-5001 CO2 Tester and Pressure Tester
|
|
The"CAN-5001 & CAN-5001-T CO2 tester and Pressure Tester" is for measuring the CO2 content in carbonated beverages filled in glass and PET bottles or cans. It is applicable to the bottles or cans with different sizes. The pressure is read on the pressure gauge as soon as the equilibrium pressure is achieved.
|
|
|
DHG-300 Digital Can Height Gauge
|
|
The "DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
PTT-300 POP & TEAR TESTER
|
|
The CanNeed "PTT-300 Pop & Tear Tester" was developed for testing different kinds of easy open ends.
Applicable to 7 different types of ends: RP / SOT / EO / OVAL / FSE / SNAP and ALUFIX.
Adopted 5 different testing modes: RP / SOT / EO / OVAL and SNAP.
Operators just need to hook the ring and press "test" button, then the PTT-300 will do the test automatically. During the testing process, the microprocessor will monitor and record the max. Pop and Tear force. With different sizes of the clamps, it is able to test different sizes of ends.
|
|
| Total page:2
Current page:1 Total records:41 |
First |
Previous |
Next |
Last
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
