|
| |
Product Classification : All Products
|
|
PTG-100 Plate Thickness Gauge
|
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. Equipped with the Mitutoyo 0.001mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
ZM-10 Digital Body Blank Gauge
|
|
The CanNeed ¡°ZM-10 Digital Body Blank Gauge¡± is made for the quality control of can body blanks. It is a precision gauge for body blank measurement/angle measurement.
|
|
|
CDG-100 Curl Diameter Gauge
|
The CanNeed "CDG-100 Curl Diameter Gauge" is a Digital gauges for measuring Curl Diameter of ends. Equipped with calibration piece. With the Mitutoyo 0.01mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
WOM 4C Welding Overlap Monitor
|
|
The CanNeed ¡°WOM 3A Welding Overlap Monitor¡± is used to measure the length and thickness of side seam welding overlap. It¡¯s equipped with the most advanced optical system and Golden LensTM, which ensured the high image definition.
|
|
|
IDG-100 Can Internal Diameter Gauge
|
IDG-100, IDG-200 & IDG-300 Can Internal Diameter Gauge
This unit serves for quickly checking the Internal Diameter of can. It is supply with a calibration piece.
IDG-100 is for small diameter cans, Cans dia. 52-100 mm (only measure one type can)
IDG-200 is for large diameter cans, Cans dia. :80-260 mm (only measure one type can)
IDG-300 is compatible for two (2) or three (3) sizes of cans.
|
|
|
|
CDG-100 Curl Diameter Gauge
|
The CanNeed "CDG-100 Curl Diameter Gauge" is a Digital gauges for measuring Curl Diameter of ends. Equipped with calibration piece. With the Mitutoyo 0.01mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
MaltSort Laboratory Malt Sieving Device
|
The ¡°MaltSort Laboratory Malt Sieving Device¡± base on the size of barley and malt to evaluate its maturity (plumpness), recommended by the EMC committee, specially developed for barley classification. Three types of fine brass strainer: 2.2mm, 2.5mm, 2.8mm.
The ¡°MaltSort Laboratory Malt Sieving Device¡± is use for classifying the malt and other corn in labs, in the beer factories, it is mainly use for evaluating the brewing barley. The working sample weight is 100g, multiple sieving can be done within a very short time and no need any dismantlement and cleaning after the sieving. The device consists of the shaking device, timer.
|
|
|
WWT-100 Welding Line Outstretched Tester
|
The CanNeed ¡°WWT-100 Welding line outstretched tester¡± is used to test the flange point welding integrality of 3-pieces cans.
|
|
|
|
WOM 4C Welding Overlap Monitor
|
|
The CanNeed ¡°WOM 3A Welding Overlap Monitor¡± is used to measure the length and thickness of side seam welding overlap. It¡¯s equipped with the most advanced optical system and Golden LensTM, which ensured the high image definition.
|
|
|
CDS-10 Can dissect saw
|
Give up the old method for dissecting cans, to observe the can interior has become so easy and clear.
The ¡°CDS-10 Can Dissect Saw¡± was specially designed to cut the can body into two axially, so that to observe the situation of corrosion or lacquer scale off.
|
|
|
WWT-100 welding line outstretched tester
|
|
The CanNeed "WWT-100 Welding line outstretched tester" is used to test the flange point welding integrality of 3-pieces cans.
|
|
|
WWP-100 Welding Seam Ball Press Tester
|
|
The Canneed "WWP-100 Welding Seam Ball Press Tester" is used to test the welding seam quality, including the welding seam strength and continuity of 3-piece cans.
|
|
|
BDD-200A Bead Depth Gauge (Digital)
|
The CanNeed "BDD-200A Bead Depth Gauge" is for measuring the bead depth of the can body, with the special designed end measuring holder, end bead depth can also be measured. The fine designed can holder, which ensures the cans keep still during the measuring, and the results are more accuracy.
BDD-200A Bead Depth Gauge is the advanced model compare to the BDD-200, it is consisting of measuring units, digital indicator and data processor, operators only need to move the measuring needle to pass the beads, then the data processor will auto calculate and display the value of bead depth. |
|
|
AXL-4000 Axial Load Tester
|
|
The ¡°CanNeed AXL-4000 Axial Load Tester¡± measures the axial force resistance of beverage cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
|
|
|
PDG-d Plane depth Gauge for Canned Food and Beverage
|
|
The ¡°PDG-d Plane depth Gauge (Digital)¡± is for measuring the bottom end depth of the cans. The measuring base would be subject to the sample size, so please indicated the end size when purchasing.
|
|
|
DHG-300 Digital Can Height Gauge
|
|
The CanNeed "DHG-300 Digital Can Height Gauge" can be used to measure the height of beverage, food, and aerosol cans. The gauges can be connected to a computer or SPC system via the adapter and cable.
|
|
|
FWG-100-D, FWG-200-D, FWG-300-D Flange Width Gauge
|
|
The CanNeed ¡°FWG-100-D, FWG-200-D, FWG-300-D Flange Width Gauge¡± is used to measure the flange width of empty cans. Reliable design, invariableness measuring pressure and measuring angle which enable the inexperienced operators can also perform the measurement accurately. Auto aligning the center of can body, applicable for different types of cans.
|
|
|
SM-24 Belt Drive Seamer
|
Canneed ¡°SM- 24 Electric Belt Drive Seamer¡± (Desktop model) enables the users to do more lab tests. Such as, adjusting some technique, enhancing the products quality, test the empty cans and free ends, to insert a temperature logger into a can before running a temperature monitoring.
It is much more convenient for those lab tests, fast, easy and high efficiency
|
|
|
AXL-10000 Axial Load Tester
|
|
The CanNeed ¡°AXL-10000 Axial Load Tester¡± measures the axial force resistance of food cans in Newton. The can is placed in a support and gradually forced upwards against the pressure plate. The space between the support and the top plate can be altered with spacers. The can crashes after the peak force has been applied that the can is capable of resisting. The maximum value can now be read in the display
|
|
|
VSM 6A Automatic Seam Monitor
|
The " VSM 6A Automatic Seam Monitor " is a compact measuring system
for quick and accurate automatic seam measurements and storing of seam images.
The seam length, body hook, end hook, actual overlap, percentage overlap;
seam gap, seam thickness and body hook butting% are measured.
The values can be stored in a Excel file and are displayed in on-screen if values are within specs.
Seam image can be printed, stored!
|
|
|
|
PTG-100 Digital Plate Thickness Gauge
|
The CanNeed PTG -100 Digital Plate Thickness Gauge
This unit serves for quickly checking the thickness of plates. The sample is presented vertically in this version. Equipped with the Mitutoyo 0.001mm Resolution Digital Indicator.
If purchased the adapter and cable, the gauge can be connected to a computer or SPC system for data collection.
|
|
|
CLT-600 Leak Tester for can
|
The canneed"CLT-600 Leak Tester for can" is used for checking the permeability of 3-piece cans in a water bath.
The can is fixed to magnet disc plate and submerged into the water.
At the same time it is subjected to pressure and leaks are revealed by air bubbles.
|
|
|
STG-200-d Seam Thickness Gauge(digital)
|
the STG-200-d Seam thickness gauge can be used to measure Seam thickness.
With measure angle compensation. The center mesure point can be adjusted.
Cans can be auto- positoned in the center easily during measuring .
With the Mitutoyo 0.01mm Resolution Digital Indicator.
If you purchase the adapter and cable, the instrument can communicate with a computer.
|
|
|
NIPPER
|
|
A convenient, all-purpose hand tool used for hand teardown of can seams. Vinyl coated hand grips, jaw width is 1¡±, overall length is 6¡±
|
|
|
CAN-125B Pasteurization Temperature Monitor
|
CanNeed CAN-125B Pasteurization Temperature Monitor has been chosen by many beverage and canned food factories.
- Convenience and durable
CanNeed CAN-125B Pasteurization Temperature Monitor is portable and it was a stainless steel weldless one-piece design, which ensured its excellent sealability and long service life.
- Powerful function
CAN-125B Pasteurization Temperature Monitor (F0 Value), record and store all temperature data of the pasteurization process, the inside and outside temperature curve of samples and runtime. Users can define the sampling frequency of the monitoring. The powerful professional software CND-LogSee can print the report and curves.
|
|
|
CIC
|
|
CIC
|
|
|
|
PDG-D Plane depth Gauge (Digital)
|
|
The CanNeed ¡°PDG-D Plane Depth Gauge for Canned Food and Beverage¡± is used to measure the plane depth of canned food and beverage. It can monitor the inner pressure or vacuum of the cans without piercing the cans.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|
