| |
Product Classification : All Products
|
|
GPG-100 General Profile Gauge
|
Measures PET bottles, glass bottles, cans, ends, rolls and chucks
|
|
|
PCT-100 PET Bottle and Preform Cutter
|
The CanNeed ¡°PCT-100 PET Bottle and Preform Cutter¡± is used to cut the bottle neck or preform neck for further sealing integrity analysis.
|
|
|
DO-100 Dissolved Oxygen Meter (on-line)
|
The CanNeed ¡°DO-100 Dissolved Oxygen Meter(on-line)¡± is used to monitor O2 content in liquid and gas on line.Adopt high accuracy optical probe,which not only makes high accuracy test and fast response,also there is no need to change diaphragm and electrolyte that reduce a lot of maintaining and running cost.
|
|
|
CND-SST-300 Secure Seal Tester (3 stations)
|
The ¡°CND-SST-300 Secure Seal Tester ¡°is used to test seal integrity on the glass or plastic containers and cans. The CanNeed-SST-300 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The CanNeed-SST-300 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
|
|
|
CND-TT-200 Torque Tester
|
Applications: Food-industry / Cosmetic/ Pharmaceutical / Chemical / Metrology
|
|
|
BBTG-200 Bottle Bottom Thickness Gauge (digital)
|
BBTG-200 Bottle Bottom Thickness Gauge (digital) is for measuring the bottom thickness of bottles, it is applicable for beer bottles or other similar bottles. Adopted the Mitutoyo digital indicator, resolution up to 0.01mm.
|
|
|
CCST-100 Crown Cap Secure Seal Tester
|
The ¡°CCST-100 Crown Cap Secure Seal Tester¡± is used to test the air tightness of crown caps. The tester is made of stainless steel, so that ensure its durability.
|
|
|
PU-2000 Pasteurization Temperature Monitor (PU Monitor)
|
The Canneed PU-2000 can be used to measure the temperature while the beer is in the pasteurization process bottles or cans, calculate the PU units (PU value), and the temperature curve can be shown by computer display or printed via a printer.
It is made of stainless steel, equipped with the waterproof design and the capacitance induction button in order to make a simple operation, easy maintenance and ensured the low maintenance workload.
|
|
|
CODG Cap External Diameter Gauge
|
The ¡°CODG Cap External Diameter Gauge¡±is used to test the out diamter of the crown caps to see if the gland is qualified or not.
|
|
|
CAN-1050D Digital Can Closing Force Gauge
|
The¡°CAN-1050D Can Closing Force Gauge¡± is for measuring the force of seaming head of the seaming machine. By using CAN-1050d, producers can avoid product defects caused by over plating: sharp edge, seam breakage, body deformation, body hook overlength, over large countersink and so on. In the meantime, producers can also avoid product defects caused by too small pallet lift force: slippery cans, too short hook and so on.
|
|
|
CSS-1000 Anti-noise Seam Saw
|
CanNeed ¡°CSS-1000 Anti-noise Seam Saw¡± is provided with an anti-noise design and a special guide for 2-and 3-piece cans with 65mm dia, such as beer cans and 209 cans. The cutting process is so precise, quick, safe and convenient to ensure precise cutting effects without distorting the cans. The seam image on Canneed series Seam Sight TM automatic seam measuring systems gets thereby every clear and improves measurement speed and reliability.
|
|
|
VSM 6A+ Automatic Seam Monitor
|
The VSM 6A+ Automatic Seam Monitor is a compact measuring system for quick and accurate automatically seam measurements, it has adopted the advanced optical system and Golden LensTM video capture device, which ensured the high image definition and the measurement accuracy. The VSM 6A+ Automatic Seam Monitor is equipped with the professional seam measuring software CanNeed CND_VSM3.0. With the CanNeed SPC data collection system, the data of actual seam thickness, actual countersink, etc., can be transferred to the computer automatically.
|
|
|
CTG-HP Hover Probe
|
The CanNeed CTG-HP Hover Probe is combined with CTG-300/CTG-310 Coating Thickness Gauge to test the lacquer film coating thickness and weight per unit area.
|
|
|
VLT-100 Vertical Load Tester
|
The CanNeed Vertical Load Tester (VLT) measures the vertical load strength of glass containers, simulating capping and stacking loads. Helps to reduce broken containers during capping and stacking.
|
|
|
Seam-X-On-line X-Ray Automatic Seam Scanner(Non-destructive)
|
The CanNeed ¡°Seam-X-On-Line X-Ray Automatic Seam Scanner¡± adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It¡¯s applicable for online in producing department. It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
Advantages: 01)Non-destructive measurement, avoid wasting samples 02)Non-destructive measurement, avoid environmental pollution and save handling charges 03)High sampling frequency, reduce the isolation inferior 04)High sampling frequency, cost saving 05)Can track the chucks corresponding to the unqualified products 06)360-degree fully scan measurement 07)Can be suitable for various types of cans 08)Higher accuracy 09)Avoid manual measurement error 10)Durable 11)Accord with the worldwide safety standards
|
|
|
Seam-X-On-line X-Ray Automatic Seam Scanner(Non-destructive)
|
The CanNeed ¡°Seam-X-On-Line X-Ray Automatic Seam Scanner¡± adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It¡¯s applicable for online in producing department. It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
Advantages: 01)Non-destructive measurement, avoid wasting samples 02)Non-destructive measurement, avoid environmental pollution and save handling charges 03)High sampling frequency, reduce the isolation inferior 04)High sampling frequency, cost saving 05)Can track the chucks corresponding to the unqualified products 06)360-degree fully scan measurement 07)Can be suitable for various types of cans 08)Higher accuracy 09)Avoid manual measurement error 10)Durable 11)Accord with the worldwide safety standards
|
|
|
Seam-X-On-line X-Ray Automatic Seam Scanner(Non-destructive)
|
The CanNeed ¡°Seam-X-On-Line X-Ray Automatic Seam Scanner¡± adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It¡¯s applicable for online in producing department. It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
Advantages: 01)Non-destructive measurement, avoid wasting samples 02)Non-destructive measurement, avoid environmental pollution and save handling charges 03)High sampling frequency, reduce the isolation inferior 04)High sampling frequency, cost saving 05)Can track the chucks corresponding to the unqualified products 06)360-degree fully scan measurement 07)Can be suitable for various types of cans 08)Higher accuracy 09)Avoid manual measurement error 10)Durable 11)Accord with the worldwide safety standards
|
|
|
ASST-100 Automatic Secure Seal Tester
|
The CanNeed ¡°ASST-100 Automatic Secure Seal Tester¡± is used to test the seal integrity after packaging. By detecting gas leakage, it effectively controls the seal integrity after packaging. It is used to test PET bottles, glass bottles and cans, also can be used to test crown caps and caps of PET bottles.
|
|
|
CanNeed-AAXL-2000 Automatic Axial Load Tester
|
|
|
|
CanNeed-ACBT-1000 Automatic Buckle Tester Bottom for Can
|
|
|
|
CanNeed-AFMS-2000 Automatic Can Measure Desk for Front Stations
|
|
|
|
AS-300D Digital Auto Shaker Beverage CO2 Calculator
|
|
|
|
CND-SST-3 Secure Seal Tester
|
The "CND-SST-3 Secure Seal Tester" is used to test seal integrity on the glass or plastic containers and cans. The SST-2 has been designed to address the special needs of sealing cans and bottles that use aluminum roll-on, twist crowns, or plastic caps. The SST-2 operates with compressed air, nitrogen, or carbon dioxide. By detecting gas leakage, rather than liquid, the Secure Seal Tester gives more sensitive, accurate readings.
SST-3 is constructed from anodized aluminum, stainless steel, and plastic materials. The tester's rugged construction withstands production line abuse, yet is accurate enough for laboratory use.
|
|
|
SeamSight®-B Full Automatic Seam System
|
The CanNeed Seam Sight® Full Automatic Seam Monitor has adopted the advanced optical system and Golden Lens® video capture device, which interference-free of external light source and ensured the high image definition and the measurement accuracy. The Seam Sight® system is equipped with the new seam measuring software Seam Sight®. The CanNeed Seam Sight® -A system can automatically collect the data from STG-200-D Seam Thickness Gauge and CSG-200 Countersink Gauge. The actual seam thickness and countersink can be generated reports together with other data. To optimize the measurement process. Measurement Process Before cutting the sample can, use STG-200-D Seam Thickness Gauge to measure the seam thickness rate; meanwhile, use CSG-200 Countersink Gauge to measure the countersink rate; then the Seam Sight -A will collect the both data automatically. After that, the sample can should be cut with CSS-1000 Anti-noise Seam Saw or CSS-2000 Seam Saw and placed at the camera position of the monitor. Then, the seaming images will be displayed on the screen. The auto measurement will be finished within 1 second if you press the ¡°Confirmation¡± button. All images and measurement data will be saved in the system data base.
|
|
|
PEBT-4000 PET Bottle Pressure Tester (Burst Tester)
|
Canneed ¡°PEBT-4000 PET Bottle Pressure Tester (Burst Tester)¡± is an advance testing equipment specialized for testing the PET bottles. It has been designed in conformity to the three (3) international commonly used testing methods, users can select the testing mode according to their requirement. PEBT-4000 is able to test the pressure capabilities that under a preset pressure or the burst test.
By the means of water replenishing pressurization, the pressurizing process was linearized, and to increase until reaching the preset point or burst point.
Users can select the testing mode through the touch-screen. Fill the sample, close the protection door, then press start. When the testing starts, the PEBT-4000 will clamp the sample and run accord with the settings automatically. The touch-screen will display the real-time pressure value and record down the max. pressure (passing test) and burst pressure (destructive test).
|
|
|
BPT-4000 Ramp Pressure Tester (automatic 2 stations)
|
BPT-4000 Ramp Pressure Tester is an advanced testing instrument for pressure testing glass containers,also can be used to test the burst value. Two positions,high efficiency.PLC controlled,LCD touch screen display.Automatic clamping system,servo control pressure process.Display real-time data,test and save data automatically. Two test ways: :linear pressurization and pressure maintaining.Users can choose testing way as to actual demands.
|
|
|
CAN-85B, CAN-125B Pasteurization Temperature Monitor (PU Monitor)
|
CanNeed CAN-85B, CAN-125B Pasteurization Temperature Monitor (PU Monitor), is the most advanced PU Monitor, high quality and powerful function.
Convenience and durable The logger of CAN-85B, CAN-125B PU Monitor is portable and it was a stainless steel weldless one-piece design, which ensured its excellent sealability and long service life.
Powerful function CAN-85B, CAN-125B PU Monitor record and store the temperature data of the whole sterilizing process, calculate the total PU value, max. temperature. The powerful professional software CND-LogSee can print the report and curve, save data .
|
|
|
Seam-X-Line X-Ray Automatic Seam Scanner (Non-destructive)
|
Seam-X-Line X-Ray Automatic Seam Scanner adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc .It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
|
|
|
Seam-X-Line X-Ray Automatic Seam Scanner (Non-destructive)
|
The CanNeed Seam-X-Lab is suitable for laboratory. Can open or close the door automatically£¬put in or take out the sample cans by manual operation. The CanNeed Seam-X-Lab Automatic Seam Scanner adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc .It¡¯s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.
|
|
|
CMT-200 Mobility/ Lubricity Tester for Cans
|
The CanNeed ¡°CMT-200 Mobility / Lubricity Tester for Cans¡± is for measuring the coefficient of sliding friction of can body and bottom. It can also measure the coefficient of sliding friction of blanks.
Install the corresponding clamp and place the sample on the clamp, then put the bob-weight unit on the sample. Pull the bob-weight and the indicator will display the coefficient of sliding friction.
|
|
"If you can not find the product you need, please contact us or leave a message."
|
|